Round bottom bottle/shaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The bottle/shaker body is 185mm long and has a very common 41mm radius. Matching caps can be found on my profile.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- BSD License
This bottle/shaker body is 185mm (7.2 inches) long and has a very common 41mm (1.6 inches) radius. The shaker's original goal was to be used a deadlift jack. With an infill of 30% i was able to use it on a 340kg (749lb) bar before breaking. With cap the lenght is supperior to the diameter of an IPF metal plate.
Check my profile for different caps. The caps match with the bottles screwing dimensions.
Please do not use this as a drinking liquid recipient. Even with food safe graded filament, FDM printing is not a food safe printing method. A solution to make FDM 3d prints food safe is to use food safe coating.