1 / 26
2020 Y upgrade for Wanhao Duplicator i3, Cocoon Create, Maker Select, and Malyan M150 i3 3D printers. — zdjęcie 1
1 / 26

2020 Y upgrade for Wanhao Duplicator i3, Cocoon Create, Maker Select, and Malyan M150 i3 3D printers.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a upgrade mod to eliminate the front and back y-frame plates along with the cheap idler bracket and wimpy…

Ocena
0 / 5
Polubienia
8
Pobrania
30
Wydruki
0
Wyświetlenia
763
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a upgrade mod to eliminate the front and back y-frame plates along with the cheap idler bracket and wimpy y-motor bracket.

This mod gives you stronger y motor bracket and a better idler tension .

Also changes the belt path to be perfectly aligned and closer to the bed.

And the y motor now sits outside of the frame area making it easier to align your belt.

there are 2 mod versions to choose from.

1 - azza z brace version with both types of feet.

2 - SWD2 rear mounted z brace.

I only uploaded the parts i modded and created.

The rest of the parts for the z braces can be found here:

azza z brace: https://www.thingiverse.com/thing:921948

SWD2 rear z brace: https://www.thingiverse.com/thing:2391089

B.O.M--

2020 Y frame upgrade Hardware needed:

2x-- 180mm 2020 extrusions

22x-- M5x6mm or M5x8mm

22x-- M5 tnut

5x-- M5x20mm ( 2 for belt guide-- 2 for bed belt bracket-- 1 for idle tensioner )

5x-- M5 nut ( 2 for belt guide-- 2 for bed belt bracket-- 1 for idle tensioner )

2x-- M4x10mm (for bed belt bracket ) -- (M4x8mm should work for stock y plate )

2x-- M4 nut (for bed belt bracket )

1x-- 8mmx40mm rod (or cut 40mm off a M8 bolt )

1x-- M3x16mm (for idle tensioner )

1x-- M3 nut (for idle tensioner )

2x-- M3 set screws (to lock down the m8x40mm rod for idle tensioner )

4x-- set screws to lock down y rods ( use original ones from your 3D printer )

4x-- M3x6mm ( for Y stepper motor )

6x-- Ball Bearing 625 2RS 5x16x5 ( 4 for belt guide-- 2 for idle tensioner )

6x-- 1mm Precision Shim ( 4 for belt guide-- 2 for idle tensioner )

1x-- new GT2 belt (For new stepper motor position and belt routing)

How I Designed This

Quick vid of the mod

Category: 3D Printer Parts

Tagi