2020 Y upgrade for Wanhao Duplicator i3, Cocoon Create, Maker Select, and Malyan M150 i3 3D printers.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a upgrade mod to eliminate the front and back y-frame plates along with the cheap idler bracket and wimpy…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 0
- Views
- 763
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a upgrade mod to eliminate the front and back y-frame plates along with the cheap idler bracket and wimpy y-motor bracket.
This mod gives you stronger y motor bracket and a better idler tension .
Also changes the belt path to be perfectly aligned and closer to the bed.
And the y motor now sits outside of the frame area making it easier to align your belt.
there are 2 mod versions to choose from.
1 - azza z brace version with both types of feet.
2 - SWD2 rear mounted z brace.
I only uploaded the parts i modded and created.
The rest of the parts for the z braces can be found here:
azza z brace: https://www.thingiverse.com/thing:921948
SWD2 rear z brace: https://www.thingiverse.com/thing:2391089
B.O.M--
2020 Y frame upgrade Hardware needed:
2x-- 180mm 2020 extrusions
22x-- M5x6mm or M5x8mm
22x-- M5 tnut
5x-- M5x20mm ( 2 for belt guide-- 2 for bed belt bracket-- 1 for idle tensioner )
5x-- M5 nut ( 2 for belt guide-- 2 for bed belt bracket-- 1 for idle tensioner )
2x-- M4x10mm (for bed belt bracket ) -- (M4x8mm should work for stock y plate )
2x-- M4 nut (for bed belt bracket )
1x-- 8mmx40mm rod (or cut 40mm off a M8 bolt )
1x-- M3x16mm (for idle tensioner )
1x-- M3 nut (for idle tensioner )
2x-- M3 set screws (to lock down the m8x40mm rod for idle tensioner )
4x-- set screws to lock down y rods ( use original ones from your 3D printer )
4x-- M3x6mm ( for Y stepper motor )
6x-- Ball Bearing 625 2RS 5x16x5 ( 4 for belt guide-- 2 for idle tensioner )
6x-- 1mm Precision Shim ( 4 for belt guide-- 2 for idle tensioner )
1x-- new GT2 belt (For new stepper motor position and belt routing)
How I Designed This
Quick vid of the mod
Category: 3D Printer Parts