Brother PT-H107 USB-C power supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and dirty adapter so you can power the label printer from Usb-C
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My batteries died so I quickly slapped together this adapter :D
BOM
2pcs 6x3 magnet - https://www.aliexpress.com/item/1005009925738981.html
1pcs Usb-C PD trigger board - https://www.aliexpress.com/item/1005009535113538.html
10cm of 24AWG wire- https://www.aliexpress.com/item/1005009648966812.html
Superglue
Double sided tape
5g of filament
Assembly:
-Solder the 9v pad on the trigger board, solder the wires
-Superglue the board into the cavity - there are cutouts for the wires
-Strip ~5mm for the positive and ~10mm for the negative wires and push them through the holes - the polarity in the picture is correct.
-Bend them into the cavity and push in the magnets so that they make contact
-Use double sided tape to glue down the adapter otherwise it will pop out
-Cut out ~12x8mm hole in the back cover like in the pictures - you can use hot knife like myself or a dremmel if you are feeling professional :D
Enjoy not needing to use batteries.