Brother PT-H107 USB-C power supply
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick and dirty adapter so you can power the label printer from Usb-C
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My batteries died so I quickly slapped together this adapter :D
BOM
2pcs 6x3 magnet - https://www.aliexpress.com/item/1005009925738981.html
1pcs Usb-C PD trigger board - https://www.aliexpress.com/item/1005009535113538.html
10cm of 24AWG wire- https://www.aliexpress.com/item/1005009648966812.html
Superglue
Double sided tape
5g of filament
Assembly:
-Solder the 9v pad on the trigger board, solder the wires
-Superglue the board into the cavity - there are cutouts for the wires
-Strip ~5mm for the positive and ~10mm for the negative wires and push them through the holes - the polarity in the picture is correct.
-Bend them into the cavity and push in the magnets so that they make contact
-Use double sided tape to glue down the adapter otherwise it will pop out
-Cut out ~12x8mm hole in the back cover like in the pictures - you can use hot knife like myself or a dremmel if you are feeling professional :D
Enjoy not needing to use batteries.