Search results: brother

Brother DCP-T510W tray paper holder stop for KAS-T310

Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310

Brother label maker cartridges organiser (TZ / TZe)

An organiser holding 2 TZ (TZe) Brother label maker tapes I use it to keep yellow (warning) and red (danger) tapes at hand Print notes No supports needed Updates log 2024-10-12 Initial version released Support the author The model is free…

Brother PT-E550W Case Latch

Printed using PETG, but any material should be fine. You'll need a little bit of flex to get the latch onto the corresponding pins of the hinge. On the hinge, enable “Supports on build plate only”. On the latch, I used paint-on supports…

Brother QL-800 Label Roll Holder

This organizer can hold a label roll for the Brother QL800. Two version are available for the 29mm and 62mm label rolls.

Brother P-Touch L-Boxx boxes

I moved my P-Touch out of the original box into a L-Boxx 136. This allow me to store more label tapes. So I created some boxes for the batteries, power supply and the label tapes of course. It can be printed in any filament you want.…

best brother trophy

works great with line supports and 10 % infill at 2mm layer hight

Assassins Creed Brotherhood of Venice Tower, Interchangeable Tops

3d Printable tower for Assassins Creed, Brotherhood of Venice board game, the tower should be cut in your slicer at the bump to make it small enough and to preserve print quality. The tower can be printed with no supports and the only…

Assassins Creed Brotherhood of Venice Hiding Spot

Small hiding spot for Assassins Creed Brotherhood of Venice to be printed without supports. I hope you like it!

Brother P900W

Brother P900W Auffangschale, auf 2 Teile geschnitten + Einsatz

Nightbrother head

-

Full Packout Insert for Brother P-touch TZe Tape Cartridges

Fix Build Explore created a wonderful Packout insert to hold a P-Touch D610BT and TZ-e tapes. This is a secondary case to go in a second Packout case to hold extra TZ-e tape. This has three rows to hold many more cartridges. The insert is…

Key/tool for Brother Correct O Ball Catridge

I created this to help refill a Brother Correct-O-Ball cartridge with a donor ribbon.

Brother Adramalech - Medium Fiend / Devil (DND / TTRPG)

👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models and that I make random minis for people then come follow and support me on Patreon - where you can ask me to make minis for you, get updates…

Rose Backroad FF Crankbrothers Werkzeughalterung

Rose Backroad FF Crankbrothers Werkzeughalterung Werkzeug kann mittels Klett Strip gesichert werden 2 x M5 x 12mm weitere Modell möglich. PN

Brother Sewing Machine Flywheel

Designed for the Brother XL6452. Original manufacturer part number: X57370022 — flywheel for Brother household sewing machines. Compatible with the following models: • Brother Star 35, 45, 50, 55, 60, 65 • Brother PS3700, PS55, PS57 •…

Brother refill bottle adapter

funnel print with PETG/PLA supports on Gyroid infill 15% Plug print with TPU Gyroid infill 15%

Mirror Queen (by Grimm Brothers)

Mirror Queen (by Grimm Brothers)

Brotherhood of Steel - Lyons' Pride stencil

This is a stencil for the symbol from the Lyons' Pride unit from Fallout 3! Minor connections have been made so it's not exact from the game, but very close. The original image is of course not owned by me - it's a fan recreation for fun.…

eggfinity gauntlets brother

THE BROTHER OF MY SERIES OF EGG PEOPLE

Gridfinity organizer for Brother P-touch Cube

This 3x4 bin (6u height) fits perfectly into your Gridfinity system. It features a dedicated slot to securely hold the printer upright, along with storage compartments for up to 6 spare TZe tape cassettes. Versions B and C feature a 15mm…

Brother E550W/PT-H500 bracket for Multiboard

A bracket to hold the Brother E550W/PT-H500 label printer (P-touch system) on a Multiboard wall. Note: This will not work with the Brother P-Touch E560 which is slightly larger. You need two or four Multibuild Lite Fix Points to attach…

Filament Sample for Dry Box and Brother DK-22205 Labels

I recently build some filament dry boxes based on the 10.6l IKEA-box. Once I finished them, I printed labels with my Brother QL-560 label printer. Looked good so far. But then I wanted to change filaments and I noticed that everytime I do…

Brother P-touch TZe Modular Cartridge Storage/Organizer (multiple sizes)

These are connectable storage containers for the Brother P-touch TZe tape / label cartridges. I looked around for a good solution for this and was unable to find any. Those I did find were set for a specific number and size of cartridges…

Replacement Foot for Brother Charger 11

My old Brother Charger 11 typewriter had the original rubber feet, and they were completely useless. The rubber was brittle and cracked, and somewhat compressed. It no longer did it's job. A simple enough shape, I threw together this…

Brother LW14 darning plate

The Brother LW14 lacks a way to switch off the feed dogs, so a darning plate is required to use a free motion foot.

Brother QL-800 Label roll holder

I liked the idea of the original design to store the label rolls neatly. However, I thought it was using to much filament for a simple storage solution so I created a new version which can be printed faster and consumes less material.…

Brother PT-P710 Skådis Mount

Mount your Brother PT-P710 / PT-P710BT to the IKEA Skådis board. Use organic supports for the hooks. Tight fit for the hooks!

Brotherhood of Steel

This digital model showcases the T-60 Power Armor , one of the most powerful and iconic suits from the post-apocalyptic world of Fallout . The model is presented in a combat stance on a themed base that instantly identifies its origins.…

Otton - an Otto older brother

Assembly will require to use 26x M2 self tapping socket head screws OTTON Design Statement Otto teaches a generation to code and build. OTTON is what happens when that generation grows up — same family, different chapter. OTTON is a…

Brother P-touch P750 / P700 label catcher (tray)

I made a tray that can be attached to a P-touch P750W label printer with double sided tape (see picture). I uploaded different sizes 50mm, 80mm and 100mm long and a model with an opening on the left and on the right, per size. It should…

Lucas Baker - Sadistic Brother RE7

"Welcome to the family, son!" Bring the most cunning member of the Baker clan to your collection with this high-fidelity, static-pose figurine. This model captures Lucas in his human form, emphasizing the disheveled, greasy, and…

Brother P-Touch TZe Label Tape Tower

There are two variants: single tower and double tower. This gives you flexibility to store between 4 and 20 tapes per tower while accommodating a range of storage spaces. If you would like a different design, let me know, I'll be happy to…

Brother Speedio Ethernet adapter

Brother P-touch P750 / P700 wall mount

Model is correctly oriented for printing, but you need to mirror the 2nd piece along the x-axis. Printed mine in PLA

[ALCH] Brother P-Touch cartridge storage (ModuBox)

These are 1x2-grid storage boxes for Brother P-Touch cardtridges. The boxes are compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have…

Bobbin compatible with Brother sewing machines/auto-winding

This prints in two parts without supports. The pieces should press-fit together, but can be glued if the fit isn't tight enough

Gridfinity Brother P-Touch Cube P300BT

A Gridfinity slot for Brother P-Touch Cube Label Printer

best brother ever

this is trhe best way to show your brother how much he means to you

Fallout Brotherhood of steel wall art

A faithful re-creation of the brotherhood logo from various fallout games / media STL and STEP file included for both versions pictured print instructions: some parts are pretty thin so maybe use a 0.12 setting for layer height and a good…

Bear Brothers

I made an free model so u guys can get it the file is blend

Fallout Brotherhood of steel Keyring

Small Keyring Printed in Pla

Super Mario Brothers 3 Coaster

102x102x8

Gridfinity Box für Brother P-Touch

Gridfinity 3 x 3 Box, angepasst für den Brother P-Touch

Brother P-Touch TZe Label Tapes Modular Organizer

This customizable modular organizer is designed to store and organize Brother P-Touch TZe label tapes of all sizes: 3.5mm, 6mm, 9mm, 12mm, 18mm, 24mm, and 36mm. It's easy to configure for your specific needs! You can choose how many…

Grenadier Dragon Lords Elves of the Silvan Brotherhood, Battle Axe

Last of my 3D scanned D&D minis from the '80s. This is the lone remaining model I have from the Elves of the Silvan Brotherhood set (6003). This is model E2 "Battleaxe". Category: Toys & Games

T-Clip SKADIS Brother P-Touch Label Printer Holder

Remix of @baconschteam's P-Touch holder to use @LineArcLine's T-Clip system . Print with bottom face against plate and supports enabled. Alternatively, you can print on the back face if supports are enabled for the front cutout panel.

crankbrothers Klic Kappe

Die Kappe war verloren gegangen. Eine Unterlegscheibe und M6er Schraube hätten's auch getan, wär aber nicht so nice. Gedruckt mit PLA 15 % Infill

Gridfinity Brother TZe tape storage with dividers, 3x5

Print 12 dividers if you want to cover yours bases. Any unused dividers can be stored in the box in the center. Fits up to 14 slim cartridges or 10 medium or 8 wide ones. Or any combination of cartridges.

4x4 Gridfinity Brother P-Touch Cube/PT-P710BT Bin with tape storage

Used Fusion 360 Gridfinity generator Since the tapes are just a bit wider than 2 units and the printer a bit narrower, I have combined the storage for the printer with space for several tapes. Also included a slit to keep the tape guide…

Pumpkin brothers 2D, 2 colors

These cute little pumpkin brothers are looking forward to helping you decorate your apartment or to give as a gift to friends. It is necessary to set the colour change on the correct layer in the slicer.

Brother 3034D Overlocker Bin Tapered with Lock

This file contains a custom design by @CJPrints for a waste bin specifically for the Brother 3034D overlocker, featuring key modifications for enhanced functionality. The front base has been tapered to ensure a snug fit. Additionally, a…

Brotherhood of the Cruciform Pendant(s), Indiana Jones and The Last Crusade

Brotherhood of the Cruciform Pendant(s), Indiana Jones and The Last Crusade Category: Props

brother innovis 15 bobbin / plate cover

brother innovis 15 bobbin cover

Brother DCP-T510W tray paper holder stop for KAS-T310

Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310

Brother label maker cartridges organiser (TZ / TZe)

An organiser holding 2 TZ (TZe) Brother label maker tapes I use it to keep yellow (warning) and red (danger) tapes at hand Print notes No supports needed Updates log 2024-10-12 Initial version released Support the author The model is free…

Brother PT-H100LB Label maker USB PD conversion

Dummy battery with metal connectors made out of M4 screws. Connect to a power source and use the label maker without wasting batteries. Tested on PT-H100LB. Might fit similar models. Standard uses 6x AAA batteries. Materials: 2x M4x25…

Skadis Brother Ptouch PTD210 Holder

Simple model for mounting your Brother PTD210 on the SKADIS mounting system from IKEA. Prints upright, without supports.

Rugged Case for Brother P-Touch Cube

I was intrigued by the Brother P-Touch Cube because of the portability, light weight, easy connectivity and intuitive use. Because of that, I use it in a lot of places and it gets carried around A LOT. To keep it safe during all this…

Frog Brothers Keyring (The Lost Boys)

This keyring is themed on the 1987 move “The Lost Boys”. Edgar and Alan Frog definitely deserve their own merchandise, so I designed this keyring for their vampire hunting business. It has a wooden stake going through the heart of the…

NOD brotherhood keychain

I made this kind of keychain for myself and added a little black color with a marker. U can make 2 types of keychain: 1. Use the usual file and done, but u might not like 1 side(bottom one) 2. And a little complicated, just print twice…

A "ring" my brother made for his friends.

Yep

Brother Sticker-Label Tag (size: 29mm x 90mm)

Made simple tag for stickers made with our Brother label maker (QL-820NWB) The 1. Model has a hook at the end, so it can hang as a flag. The 2. Model has a loop in the center so it can be sip tied to a cables where i cant see the what…

Brother XR1355 Spool Holder

Replacement spool holder for the XR1355. Printed with PLA, 0.2mm layers, base plate supports, and brim. After printing, use a razor blade (or similar) to gently separate the supports from the spool holder (see pics). Reassemble with…

Brother PT-E550W Case Latch

Printed using PETG, but any material should be fine. You'll need a little bit of flex to get the latch onto the corresponding pins of the hinge. On the hinge, enable “Supports on build plate only”. On the latch, I used paint-on supports…

Brother p-Touch H110 Multiboard Mount

Hang your pTouch labeler on your multiboard using multipoint mounts.

Brotherhood Symbol

Brotherhood Symbol

Brother Tray Handle Reinforcement HL-3170CDW, MFC-9330CDW, MFC-9340CDW

I had a heavily used printer tray and the area above the handle started to break. Created this model after attempts to super glue failed to keep it together. Back part is used for drilling guide. There are 2 models Back which is 94mm…

Haunted Mansion Tombstone Brother Claude

Haunted Mansion Tombstone Brother Claude

Brother Labelmaker Insert for SBox

I wanted a nice box for my labelmaker, so I combined a SBox with an insert. It has room for the labelmaker, powersupply and ten tapes. The labelmaker is stored “tilted”, so its surface will be even (more or less) and allow for the top…

Brotherhood of steel

Check out my cults3d page, it has a lot more files https://cults3d.com/en/users/ItsTheBot/3d-models

Brother Skitch PP1 Empty Hoop

This is a basic primitive hoop intended for making custom hoops for the brother skitch pp1 embroidery machine Hardware: 8x 10x2mm round magnets

Brother skitch PP1 sock embroidery frame

Basic primitive hoop edited for embroidering socks on the brother skitch pp1 embroidery machine Hardware: 8x 10x2mm round magnets

Frame Embroidery Brother

Impreso en PETG Layer 0,16mm 3 perimetros Infill 30% honeycomb

Brother P-touch EDGE Label Maker Wall Cradle

Wall cradle for a Brother P-touch EDGE PT-E105 label maker. Secures to the wall with a medium Command Strip. I included a little slot to hide the Command Strip pull tab a bit. The printed version shown in the main post picture is a…

Brother DK overhead mount

A simple mount for overhead storage on the bottom side of a shelf for example for Brother DK rolls. The mount is designed for two 3mm countersunk screws.

Brother E550W DC Port Plug

Tested with Brother E550W, should work with similar models.

Frozen Little Brothers

This is a character from the short film Frozen fever. If there are any problems with this model(which there shouldn't be) please let me know. I don't have a 3D printer of my own so downloading my models and following me help me get more…

Brother QL-800 Label Roll Holder

This organizer can hold a label roll for the Brother QL800. Two version are available for the 29mm and 62mm label rolls.

Brother HL-2270DW Laser Printer Tray Extension Replacement for part LY2274

This replaces the tray extension which the hinge broke off (it's easy to break). It costs almost half of brand new printer to replace, so I figured I just print one myself. You have to wiggle quite a bit to insert and deploy, but it works…

Brother P-Touch L-Boxx boxes

I moved my P-Touch out of the original box into a L-Boxx 136. This allow me to store more label tapes. So I created some boxes for the batteries, power supply and the label tapes of course. It can be printed in any filament you want.…

Brother 1034D Serger Thread Catcher

Need a replacement for your Brother 1034D Serger's lost or broken thread catcher? Look no further. This design incorporates a sturdier retention tab than the original to keep the basket snug against the body of your serger, and even…

Brother labels for Filament swatch

This is my labels for the Filament Swatch v2 found at https://makerworld.com/en/models/663419#profileId-590680 I use the Brother QL-810W printer and DK-11209 labels (62x28,9mm) Labels are in the .lbx format that the Brother label software…

IKEA Skadis Brother P-Touch T-clip mount

Simple holder for Brother P-Touch label printers (designed for H110 but should fit similar models like E110). Inspired by this holder , which works well in general but has tendency to be removed from the wall when grabbing the printer,…

BROTHER Laser Printer Paper Tray Feed Cog Wheel Spare Part for Model MFC-8860 and similar Models

The provided cog wheel is a replacement/spare part of the removable paper feed tray mechanism, which in my case was the earliest part to break in the otherwise sturdy and lasting design of my BROTHER MFC-8860 laser printer. Since the…

Brother Innovis F540E sock frame

Frame for inserting socks into Brother Innovis F540E embroidery machine Made in collaboration with @Bibik_2062343 This custom frame (13x18 hoop) will allow you to embroider designs on socks (or at least make it easier and more…

Crankbrothers Cleatplate

Distanzplatte für Crankbrothers Cleats in alternativer Höhe. Damit man beim laufen nicht so auf dem CXleat läuft und dennoch noch gut in die Click Pedale einklicken kann.

Packout Insert for Brother P-touch D610BT

I found that a Brother P-touch D610BT label maker (and possibly other similar models) fit nicely in a Milwaukee PACKOUT Compact Organizer (48-22-8435) but the TZ-e cartridges and other associated cables didn't fit very well so I modeled…

Literally the experimental ocarina but with a lanyard strap so you don't drop it in a pile of snow and lose it until your brother finds it in the grass near the pile of snow after the snow melts

Literally the experimental ocarina but with a lanyard strap so you don't drop it in a pile of snow and lose it until your brother finds it in the grass near the pile of snow after the snow melts

Brother TN-243 toner reset wheel

To use this wheel, you have to remove small part of the plastic to get it in.

SUPER SMASH BROTHERS LIGHTER SLEEVE FOR BIC LIGHTERS

SUPER SMASH BROTHERS LIGHTER SLEEVE FOR BIC LIGHTERS. IF YOU ENJOY THIS MODEL THEN LIKE AND SUB FOR MORE CONTENT. THANK YOU

Brother TZe Tape Holder

Simple storage bin for Brother label maker TZe tapes.

Brother P-touch Case

Dies ist eine speziell entwickelte Box zur Aufbewahrung von 12 Brother P-touch Beschriftungsbändern. Sie ist in 2 Reihen mit jeweils 6 Fächern unterteilt, die exakt auf die Maße der Bänder abgestimmt sind. Die Konstruktion ermöglicht eine…

Brother MFC Drucker Ersatzteil

Ersatzteil für eine Brother MFC … Drucker

Brother VC500W cartridge holder - gridfinity bin

My VC500W printer came in a kit including one of each label width and a cleaning cartridge. They've been lying on the desk behind the printer since then. Simple gridfinity bin to store them.

Keytags for usage with Brother P-Touch tapes

I was in need of a simple keytag, which i could label with my Brother P-Touch labels. These TZ(e) tapes are coming in different flavours, so i made a bunch of different sizes. The have rounded edges and a small chamfer at the top and…

Brothers and sister

A model of a boy and girl huggin his little brother

#1 Brother Picture Frame

Just resize it to however you like it.

best brother trophy

works great with line supports and 10 % infill at 2mm layer hight

Sock Embroidery Frame for the Brother Skitch PP1

Purpose This sock frame (or sock hoop) is an add-on for the 10x10cm frame for the Brother Skitch PP1, a cheap free arm embroidery machine, for printing on socks and similar items. It replaces the standard the magnetic cover and you will…

Brother TZe Tape Cartridge Box

This storage box is designed to hold up to 7 Brother P-Touch TZe label tapes securely. It is a remix of two existing designs, combining a rugged box with a modified cassette tray to keep the tapes from tipping over. The insert is printed…