Embroidery sock frame for Brother 4in 10cm hoop
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.13 – €1.39 net (excluding VAT)
For file: sock-frame-0-98_0.4mm_46m_PLA.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.26 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 46.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Sock embroidery frame for Brother SA432 (4inch 10cm) hoop
- Rating
- 0 / 5
- Likes
- 66
- Downloads
- 816
- Makes
- 0
- Views
- 4,416
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and a hole for the mouth. Also the embroidable area is highlighted now on the sides of the hole.
I printed it with clear PLA, 0.6 nozzle, 2 perimeters, no top and bottom layers, 10% infill, honeycomb.
Instructions for using this frame are here.
OpenSCAD json params:
{ "parameterSets": { "Brother": { "BORDER_DIST_LR": "8", "CORNER_HOLE_R": "6", "EXTRA_SLITS": "false", "HOLE_LR": "6", "HOLE_X_L": "50", "HOLE_Y_L": "60", "LIGHT_DESIGN": "false", "MODE_3D": "true", "MOUTH_DIST": "8", "MOUTH_L": "90", "MOUTH_W": "6", "PLATE_OFFSET": "0", "R": "21", "RECT_R": "5", "ROUNDING_BACK_L": "90", "ROUNDING_BACK_W": "3", "ROUNDING_FRONT_L": "90", "ROUNDING_FRONT_W": "3", "ROUNDING_LEFT_L": "125", "ROUNDING_LEFT_W": "3", "ROUNDING_RIGHT_L": "125", "ROUNDING_RIGHT_W": "3", "SLIT_BACK_W": "4", "SLIT_BACK_X_L": "25", "SLIT_BACK_Y_L": "25", "SLIT_BACK_dist": "12", "SLIT_FRONT_X_L": "30", "SLIT_FRONT_Y_L": "70", "SLIT_FRONT_dist": "13", "SLIT_FRONT_out": "27", "SLIT_W": "6", "SUBST_Z": "20", "TEXT": "false", "VERSION": "V0.98", "X_L": "134", "Y_L": "170", "Z": "4.9" }, "Brother2": { "BORDER_DIST_LR": "8", "CORNER_HOLE_R": "6", "EXTRA_SLITS": "false", "HOLE_LR": "6", "HOLE_X_L": "50", "HOLE_Y_L": "60", "LIGHT_DESIGN": "false", "MODE_3D": "true", "MOUTH_DIST": "8", "MOUTH_L": "75", "MOUTH_W": "6", "PLATE_OFFSET": "0", "R": "35", "RECT_R": "5", "ROUNDING_BACK_L": "90", "ROUNDING_BACK_W": "0", "ROUNDING_FRONT_L": "90", "ROUNDING_FRONT_W": "0", "ROUNDING_LEFT_L": "125", "ROUNDING_LEFT_W": "0", "ROUNDING_RIGHT_L": "125", "ROUNDING_RIGHT_W": "0", "SLIT_BACK_W": "4", "SLIT_BACK_X_L": "25", "SLIT_BACK_Y_L": "25", "SLIT_BACK_dist": "12", "SLIT_FRONT_X_L": "30", "SLIT_FRONT_Y_L": "70", "SLIT_FRONT_dist": "13", "SLIT_FRONT_out": "25", "SLIT_W": "6", "SUBST_Z": "20", "TEXT": "false", "VERSION": "V0.98", "X_L": "139", "Y_L": "174", "Z": "4.9" } }, "fileFormatVersion": "1", "parameterSets": "", "parameterSets": ""}