P
PrintablesMartinD
Laptop stand for 14inch computer
Holder for 14 inch laptop. You need two parts of it → print it two times. Printed without top and bottom surface, honeycomb infill.
- Downloads
- 143
- Likes
- 18
- Rating
- 5
Search results: 4inch
Counting matching models…
P
PrintablesCreativus
GoPro Mount for a 3/4inch or 19mm tube with end cap and M4 nut (Remix of Go-Pro ring mount)
Remix with an end cap, 3/4in or 19mm hole for a tube or pipe, and hole to place an M4 hex nut. I suggest printing it with 100 % infill for good strength. Feel free to like, download and follow. If you want check my other models. Happy…
- Downloads
- 51
- Likes
- 7
- Rating
- 0
P
PrintablesSKT
Hose Connector | Magnetic | Duct Adapter | 100mm 4inch
Used magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs. It's also possible to simply connect two female adapters. These are quicker and easer to print but don't…
- Downloads
- 1,493
- Likes
- 849
- Rating
- 4.75
P
Printablesnolibert
Air System / Ventilation - Check Valve / Flap for 100mm / 4inch
Another thing that came out of my ventilation system for my 3d printer setup. I needed a check valve that prevents air from the outside to come in while letting air be pushed through from the inside. I tested some off the shelf stuff but…
- Downloads
- 683
- Likes
- 161
- Rating
- 4.8
P
PrintablesJuan Carlos Bodoque
uncomplicated 4inch pipe magnetic coupler
Designed a simple pipe coupler that uses 6x3mm magnets it has 8 magnet holes, allowing to place magnets however you like, the magnet hole has enough room to fit the head of an M3 bolt, so you can also screw couplers together or screw them…
- Downloads
- 438
- Likes
- 312
- Rating
- 0
P
PrintablesWill Norcott
120mm fan to 100mm/4inch duct adapter
I made this to adapt a 120mm fan to 100mm heat resistant duct so I can control the airflow to my smoker
- Downloads
- 367
- Likes
- 65
- Rating
- 5
P
PrintablesBig Merona
Sand scoop 100mm(about 4inches)
This is a sand scoop with a diameter of 100 mm.(about 4 inches)The height is about 150mm. (about 6 inches) It can also be used to filter out cat poop. The material used was PETG. ADD Added 5mm hole type for cat poop shovel.
- Downloads
- 361
- Likes
- 143
- Rating
- 5
P
Printablessmysnk
Hydroponics Net Cup / Pot System for 4inch PVC Pipe
Hydroponic Net cup/pot System for 4" PVC Pipe Start your plants off first in the smaller net cups in a cloner/nursery. Once you are ready to move your plants to your 4" PVC pipe hydroponics system, you simply use the cap + grommet pieces…
- Downloads
- 314
- Likes
- 60
- Rating
- 0
P
PrintablesJoel
4inch Kick Drum Microphone Port
I needed a 4inch kick port for my floor tom conversion. Why pay $50+ for a plastic ring when you can print one?! Ive even added a screw so it can be removed/replaced later. It took me a couple of iterations to find a light weight and…
- Downloads
- 299
- Likes
- 44
- Rating
- 4.67
P
Printablessmysnk
3.5inch Hydroponics Net Cup for 4inch PVC Pipe
For 4inch PVC pipe inside diameter, 4.5 inch outside diameter. New design: https://www.thingiverse.com/thing:2474497 Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: Yes Resolution: 0.2 Category: Outdoor &…
- Downloads
- 275
- Likes
- 58
- Rating
- 0
P
PrintablesAxField
Macbook 14inch M1 stand
A sturdy remix of the stand made by Mabur specifically for the 14" MacBook M1 Pro. His license doesn't allow Remixing for some reason, although the changes I've made are pretty significant in making the stand sturdier for your expensive…
- Downloads
- 245
- Likes
- 20
- Rating
- 5
P
PrintablesSKT
Hose Adapter | 76mm to 100mm | 3inch to 4inch | Magnetic Connector | Duct Coupler
Set of adapter to connect a 76mm (3inch) hose to a 100mm (4inch) hose. Used magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs.
- Downloads
- 205
- Likes
- 40
- Rating
- 0
P
PrintablesThrorin
HP DesignJet 500 - 24inch Roll Paper (Spool Holder)
My colleague had this plotter but the fins from one of the spool holders were cracking and finally broke off. He asked me if i could print one for him and i said yes. At first i did some search for a replacement part for the Spool Holder…
- Downloads
- 197
- Likes
- 10
- Rating
- 0
P
Printablesbonkerz
Closed end wrench for Kohler 4inch flush valve nut
I was replacing my flush valve, Kohler 1216610, found this big nut that was just over 4" across the flats. I don't have an adjustable big enough, so quick design and print to save the day. Print this strong, use at least 20% infill, more…
- Downloads
- 187
- Likes
- 4
- Rating
- 0
P
PrintablesMZA
4inch to 2 inch duct adapter
Just a simple adapter/reducer to connect a 2 inch to 4 inch duct with grooves for the hoseclamps
- Downloads
- 185
- Likes
- 10
- Rating
- 0
P
PrintablesMino
Sprinkler irrigation system Nozzle variable spray sizes for 4mm ID Tube 1/4inch
I did not find any cool and working designs so i made my own. The Model is designed for 1/4 inch or 4mm inner diameter Tube. I uploaded some spayer sizes but the Fusion file is attached. Printed in ABS+ but any other Material should work…
- Downloads
- 137
- Likes
- 14
- Rating
- 0
P
Printableshiroken55555
4inch dryer exhaust duct vent for wall or plywood for heated chamber or enclosure
4inch dryer exhaust duct vent for wall or plywood Drill 102mm diameter hole to insert this. It might work for your heated chamber enclosure.
- Downloads
- 135
- Likes
- 25
- Rating
- 0
P
PrintablesMusketeer Computing
Xtool P2 exhaust adaptor for 10cm (4inch) hose
This is a basic adaptor to be able to use a 10cm (4inch) exhaust hose. No need for extra hardware. One part print only. This is a very basic design but it does the work very well. No need for extra tool or fitting. No need to dismantle…
- Downloads
- 126
- Likes
- 5
- Rating
- 0
P
PrintablesYell
Magnetic Hose Connector 4inch
changed holes for 6mm magnets added rim removed male side thicken the shell added Bridge Counterbore
- Downloads
- 124
- Likes
- 17
- Rating
- 0
P
PrintablesroosterCorn
4inch dust collection port
4inch dust collection port. It looks like a cylinder, but it is slightly tapered. The dimensions of this roughly match what is built in to some of my tools that have built-in dust ports. A standard 4inch hose can fit over it, and all the…
- Downloads
- 119
- Likes
- 22
- Rating
- 5
P
PrintablesJonathan
Hose Connector | Magnetic | Duct Adapter | 100mm 4inch
This is a remix of the Hose Connector | Magnetic | Duct Adapter | 100mm (4 inch) designed to work with 10mm x 1.6mm magnets . I use this setup to easily switch the exhaust output between my 3D printer and my microsoldering station . The…
- Downloads
- 117
- Likes
- 26
- Rating
- 5
P
PrintablesAnson Liu
5.9 inch diameter AC window vent to 4inch female duct adapter
This adapter lets you connect a 4 inch air duct with mass produced 5.9 inch window vents. This has flanges for locking into the window vent like the normal window vent cover and even has space for the vent bird guard/bug screen to be…
- Downloads
- 117
- Likes
- 19
- Rating
- 0
P
PrintablesTim
Smartphone Holder - GoPro Mount and 1/4inch Thread
Smartphone Holder for GoPro / Actioncam mount or 1/4 inch camera tripod (in the making) thread. For phone with a width between 61mm and 87mm. Maximum depth of 10.5mm. No Support needed. Printed with 20% infill.
- Downloads
- 102
- Likes
- 16
- Rating
- 4.67
P
PrintablesMark Schramm
Home Assistant Panel Case for Waveshare 4inch Square Touchscreen + Raspberry Pi 5
This case is for the Waveshare 4inch Square LCD: https://www.waveshare.com/wiki/4inch_DPI_LCD_(C) It has cutouts for a Raspberry Pi 5 but should fit other fullsize Pi models. It has openings for MicroSD card, power and USB
- Downloads
- 100
- Likes
- 23
- Rating
- 0
P
PrintablesHetothet
Helldivers 2 Coaster 4inch/102mm
Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX
- Downloads
- 93
- Likes
- 21
- Rating
- 5
P
PrintablesDschwick
4inch and 5inch net pot drip ring
Remixed to fit inside 4inch and 5 inch pots. Needypoo's design also had a small layer gap where the nozzle gets smaller, so I fixed that. I also added a bevel to the tip of the nozzle to make it easier to insert into tubing. I haven't…
- Downloads
- 91
- Likes
- 7
- Rating
- 5
P
PrintablesAndi
esp32-2432S028 Display Stand 2.4inch
A display stand for the cheap yellow esp32-2432S028 with USB-C Category: DIY
- Downloads
- 87
- Likes
- 7
- Rating
- 0
P
PrintablesTomáš
Waveshare 4inch Resistive Touch Screen for Pi cover cover / case
Waveshare 4inch Resistive Touch Screen for Pi cover / case
- Downloads
- 83
- Likes
- 3
- Rating
- 0
P
PrintablesIamKayoh
4inch PVC Pipe Mount
A functional print I designed to fit around a 4 inch PVC pipe and be mounted to the underside of a camper trailer.
- Downloads
- 80
- Likes
- 17
- Rating
- 0
P
PrintablesNSH Custom Discs
MultiGP Gate Hinge - 3/4inch PVC
This MultiGP double gate hinge. I like this one better than standard articulating hinge because you can stack gates with this piece. Made this one to fit 3/4 inch PVC. Also included a coupling for joining pieces.
- Downloads
- 77
- Likes
- 17
- Rating
- 0
P
Printablestrident727
3/4inch PVC Clip
Utilized the original design, but needed more of an offset for the clip. Please post your makes as well!
- Downloads
- 67
- Likes
- 15
- Rating
- 0
P
PrintablesPatrick Hemmes
Decorative Plate holder for 10cm plates (4inch)
Decorative Plate holder for 10cm plates (4inch)
- Downloads
- 65
- Likes
- 15
- Rating
- 0
P
PrintablesJesse
Plant Pot Stand for 4inch pot
Plant pot stand with a drainage hole in the center. The size is 4inch diameter but it fits larger and smaller plant pots. There are a few slightly different versions available for download. Some versions have knurling to create a rough…
- Downloads
- 63
- Likes
- 12
- Rating
- 0
P
PrintablesLilyPink
4inch Pond Filter
A great attachment for any pipe intake, especially in ponds / water features to prevent fish / debris entering your pipework and pump. Suggested print orientation - ‘Pointy end Upwards’ Material - Whatever you like other than PVA ;-)…
- Downloads
- 59
- Likes
- 9
- Rating
- 0
P
Printablesspusuf
Simple 45 degree VESA monitor stand (Height for 34inch ultrawide)
!! You can remix the bottom piece to attach to a piece of MDF on the bottom, wider printed base, or different sized monitor heights. Check remixes to see what other people have done, or post your own. I have two 34inch ultrawide monitors,…
- Downloads
- 54
- Likes
- 3
- Rating
- 0
P
PrintablesMinty Trebor
4inch 4848S040 ESP32 Screen Case/Stand
Case stand for the 4inch 4848S040 ESP32 Touch Screen Printed @ 0.24 layer height in PLA - no supports
- Downloads
- 52
- Likes
- 5
- Rating
- 0
P
PrintablesMupshot
4inch Deadcat FPV quad
WIP 4inch dead cat FPV drone. additional parts will be published as I make revisions This is an ongoing project to build a 4s Li Ion LR cruiser. Publishing the parts as of June 2022. Based on the success I had with the 3inch Microbeast.…
- Downloads
- 51
- Likes
- 11
- Rating
- 0
P
PrintablesUntangleWORKS
FGC9-MKII XM8 XL 14inch one piece SHROUD set
just like before keep in mind that you need longer tools to install these shrouds. this will use the hybrid rail. have fun with it, and looking forward to see some of the builds in the community. the links to the FGC9 MKII one piece…
- Downloads
- 49
- Likes
- 2
- Rating
- 0
P
PrintablesOver Tinker
4inch Y connection with valves
I printed with Mk4S. Designed for minimal supports required aroud the bolt holes. The flaps are held by 2 m3x10mm bolts. The bottom bolt is used for tention adjustment .
- Downloads
- 47
- Likes
- 13
- Rating
- 0
P
Printablesnolibert
Prusa Core One Magnetic Air Ventilation System for 4inch / 100mm Tubes
This ventilation system is based on the work of iduckett and his ventilation mount for the Prusa Core One. This remix expands the system by adding the option to quickly detach the 100mm / 4-inch exhaust hose using a magnetic mount.…
- Downloads
- 45
- Likes
- 18
- Rating
- 0
P
PrintablesUrXBf
Filter Sock Holder 4inch/ 105mm Remix
Really needed a place to hang my filter socks while I change them out or let them drip before taking them to clean. I trimmed it up a bit to be more size friendly to my build plate. Mounted with double sided tape.
- Downloads
- 41
- Likes
- 7
- Rating
- 0
P
PrintablesUntangleWORKS
FGC9-MKII UNW 14inch one piece SHROUD set
just like before keep in mind that you need longer tools to install these shrouds. this will use the hybrid rail. have fun with it, and looking forward to see some of the builds in the community. the links to the FGC9 MKII one piece…
- Downloads
- 41
- Likes
- 3
- Rating
- 0
P
PrintablesPariDot
Mastercraft 12-1/2-in Planer Shroud For Vacuum 31.2mm(1-1/4inch)
I recently bought a planer that didn't come with any sort of shroud to hook up to a vacuum to keep the dust and wood chip mess to a minimum. I have split the long parts in half so that they would fit on a normal printer bed size. I…
- Downloads
- 39
- Likes
- 5
- Rating
- 0
P
PrintablesUntangleWORKS
FGC-9 UNW 14inch Long barrel 2021 shroud set
There are different models included. they work for a barrel in a size of 12 inch or 300mm. keep in mind that you need to use long keys to install the bolts. this the one piece version so a larger printer is needed. and tools to instal…
- Downloads
- 39
- Likes
- 3
- Rating
- 0
P
PrintablesSpacedog
Large Eye Wool Needle 10cm 4inch
Sewing Needle for thick yarn/wool/ribbon crafts. 10cm 4inch Recommend print with PLA using max quality .2mm nozzle/.06mm layer height with a 2 layer brim. model can be scaled down easily by 50%, so a .4mm nozzle should suffice. Tree…
- Downloads
- 36
- Likes
- 7
- Rating
- 0
P
PrintablesJordordan
Nosecone assembly for 4inch inner diameter 4.25inch outer diameter rocket
Nosecone assembly for 4inch inner diameter 4.25inch outer diameter rocket
- Downloads
- 36
- Likes
- 4
- Rating
- 0
P
PrintablesPeter Petermann
Stand for TBS Source Podracer 4inch Drone
Stand for 4" drone (TBS Podracer 4") I've designed this stand for my Tiny Champions , which use TBS Podracer 4" frames, now I have no build using the original TBS Podracer canopy, so i can't provide photos with those (I appreciate if you…
- Downloads
- 36
- Likes
- 2
- Rating
- 0
P
Printableseyefly
"Stiffy" 4inch freestyle frame - optimized for DJI O3 - unibody
This is the unibody-version. For the version with removable arms, go here: https://www.thingiverse.com/thing:5826791 If you need help building it, or you need an adjustment made to the design, please reach out to me on my Discord-channel…
- Downloads
- 35
- Likes
- 6
- Rating
- 0
P
PrintablesUntangleWORKS
FGC-9 UNW 14inch LB 2 piece
keep in mind that you will need a LONG key to install this shroud. and since this is the 2 piece version. will you need so bolt of glue this model. but this model can also be printed as 1 piece if you like the look of it without the…
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
PrintablesUntangleWORKS
FGC9-MKII UNW 14inch one piece SHROUD set
these shrouds are modified from my FGC9 MKI designs to work with the MKII. just like be fore keep in mind that you need longer tools to install these shrouds. and I use M3 bolts that need a hex key to install and a washer to make the…
- Downloads
- 33
- Likes
- 2
- Rating
- 0
P
PrintablesAndysTechLab
Ikea UPPATVIND 4inch Attachment
Created this part from a viewer request - so i haven't printed this part, just did the CAD! In this frame the stock cloth filter gets inserted Due to better print orientation i made the pins a seperate part The four pins can just be…
- Downloads
- 31
- Likes
- 5
- Rating
- 0
P
PrintablesSeb
Paint mixer head (for 1/4inch 6mm dowel) - larger
paint mixer head , remixed, that uses a 1/4 in (6mm) dowel. Print is as is, at least 3 walls. dowel should be quite snug, Im adding the fusion file, in case anyone whats to... whatever Post photos!
- Downloads
- 31
- Likes
- 7
- Rating
- 0
P
Printablesand7ey
Raspberry Pi 4 Anycubic i3 Mega S 4inch SPI Screen Case Mount
After moving to Klipper like on my other 3 Vorons I realized that my old Mega Screen is obsolete. So I added a 4inch SPI touch screen to replace stock screen. The screen is mounted directly on Rpi GPIO. More on the screen you can find…
- Downloads
- 31
- Likes
- 7
- Rating
- 0
P
PrintablesIsaac Howard
4inch duct hole cover
New and Improved version here https://www.printables.com/model/555970-4-inch-104mm-duct-cover-improved
- Downloads
- 30
- Likes
- 5
- Rating
- 0
P
PrintablesSnicklefritz
SimpleTag Nametag Pin - Butterfly Clutch - 1x4inch
1" x 4" nametag that can be used with butterfly clutch pins to be attached to a shirt or anything else. Print Nametag Add pin to nametag Customize insert text in Bambu Studio Print Insert Clip insert into nametag Done. Details and…
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
PrintablesRodrigo Sclosa
4inch Racewhoop Pro
I decided to design my version of the amazing FreeZillion 3 inch Racewhoop, but in 4 inch. Thanks to FreeZillion ( https://www.thingiverse.com/thing:4608171 ) for inspiring this project. I've attached the full project from Fusion 360 if…
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
PrintablesAndrewMi66
50mm Tall Vented Riser with 4inch duct for Qidi Plus 4
This replaces just the left section of stews riser and allows you to easily connect a 4inch duct. I've been using it to connect an extractor fan which then vents the air out of the window to try keep the room temp down. It seems to help…
- Downloads
- 25
- Likes
- 9
- Rating
- 0
P
Printableseyefly
"Stiffy" 4inch freestyle frame - optimized for DJI O3 - removable arms
This is the version with removable arms. For the lighter unibody-version, go here: https://www.thingiverse.com/thing:5827084 If you need help building it, or you need an adjustment made to the design, please reach out to me on my…
- Downloads
- 25
- Likes
- 5
- Rating
- 0
P
PrintablesUntangleWORKS
FGC68-MKII XM8 XL 14inch one piece SHROUD set
this is the shroud set based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. to…
- Downloads
- 25
- Likes
- 3
- Rating
- 0
P
PrintablesUntangleWORKS
FGC-9 UNW 14inch Long barrel 2020 shroud set
There are different models included. they work for a barrel in a size of 12 inch or 300mm. keep in mind that you need to use long keys to install the bolts. this the one piece version so a larger printer is needed. and tools to instal…
- Downloads
- 25
- Likes
- 4
- Rating
- 0
P
PrintablesTaiwanWildEggs
Lado Exhaust Duct - 90° Adapter Mod, Core One Low Profile Side UP / DOWN Exhaust Duct, 90 degree, 100mm 10cm 4inch Hose elbow fitting
A 90° Adapter - Mod for Lado Exhaust System This is an add-on for the original Lado Exhaust by @jesh Keeping the duct protrudes only 75mm from the back of your printer. Feature Flexible 90° adapter for turning UP or DOWN, in both LEFT and…
- Downloads
- 22
- Likes
- 8
- Rating
- 5
P
PrintablesProject_404
Adjustable Circle - Iris Compass - Drawing Circle - Diameter 10cm 4inches
This design is made mainly for drawing circles while also being a beautiful design. If you like highly mechanical designs with a lot of gears visible and you can see them interacting with each other, you will most likely enjoy this design…
- Downloads
- 22
- Likes
- 6
- Rating
- 0
P
Printablesspajas
guition 4inch display mount for EU wall socket
Wall-mount adaptor for the Guition 4848S040 (4" ESP32-S3 display) This adaptor lets you mount the Guition 4" display straight onto a standard 68 mm EU wall socket, so it sits flat against the wall with just a 2 mm bezel. It’s sized around…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesUntangleWORKS
FGC-68 UNW 14inch LB M
this is the shroud set based on the FGC-9 shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. to complete…
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
PrintablesAussie_G
Harley Switch Mount 1 1/4inch Bars
Allows mounting of a 12mm switch on 1 1/4inch bars Uses Qty.4 M3 Heat set inserts & 4x M3x16 SHCS Screws
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
Printablesluisriverag
Xiaomi IP camera 360 24inch Monitor VESA mount
Best place for a Xiaomi IPcam was on top of a monitor, so I designed this that fits into the back (VESA mount) of an Asus 24" monitor Category: Tool Holders & Boxes
- Downloads
- 19
- Likes
- 4
- Rating
- 0
P
PrintablesUntangleWORKS
FGC-68 UNW 14inch LB 2020
this is the shroud set based on the FGC-9 shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. to complete…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesCarter
13/14inch Notebook Stand
For 13/14 inch Notebook Stand, Stand detail as picture show, Notebook must width less than 1.8cm when panel cover close , and Stand height 15cm within 5R Radius.
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesUntangleWORKS
FGC-68 UNW 14inch LB 2 piece
this is the shroud set based on the FGC-9 shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customize the look of your marker. to complete…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesUntangleWORKS
FGC-68 UNW 14inch LB 2021
this is the shroud set based on the FGC-9 shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. to complete…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
Printablesmasařík
Space divider for 24inch toolbox
Partitions for dividing the storage space in the Stanley toolbox 24 inch (STST24410). Angles are used for fixation, via glue or double-sided adhesive tape.
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesChris kenworthy
Nicrew Classic Gen 2 18-24inch 10 gal Light Riser
Nicrew's LED light is very close to the top of the aquarium I made this to raise the light up some. The light is a little less intense, but is a little more even, especially in the back corners of my tank that I have raised up a little…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesASUSenthusiast
D6 4inch Hilt Coupler
all D and F series parts are compatible
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesMeiming
360 go 2 Roma 4inch
Malováno pro tisk z nylonu a pouzdro na kamerku má na zádech ztenčení pro magnet 20x10mm tlouš'tka co komu vyhovuje, nebo pro gramaře místo magnetu stahnout gumičkou. Spodek držáku sedí na dron Roma 4 inch ješte k tomu myslím patří…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesRodrigo Sclosa
Jack O' Lantern Canopy (For 4inch and above)
My Jack O'Lantern Canopy for Toothpicks... Print it on TPU.. Print Settings Printer: Delta Rafts: No Supports: Yes Resolution: 0.14 Infill: 25% Filament: any TPU Orange Category: Hobby
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
Printables3DFIREDESIGNS
GRIDFINITY DEEPWELL METRIC SOCKET 1/4INCH DRIVE SOCKET ORGANIZER
Designed in fusion 360 using the gridfinity design. Holds metric ¼ inch drive deep well sockets 9mm, 10mm, and 13mm. I included a photo of all the hole dimensions if you would like to check your sockets for fitment. Letters are raised so…
- Downloads
- 12
- Likes
- 4
- Rating
- 0
P
PrintablesRoland Daum
LED Backlight Frame - 24inch - 100x100 Vesa
A backlight monitor frame for LED stipes. Can be mounted onto an 100x100 Vesa mount and is made for an 24inch monitor.
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesGunner A
4inch extra screen
Turned a 4inch HDMI Display-C into a second screen for your laptop. uses, 4 m3 screws, 4m3 heatset inserts, micro usb to usb, small usbc dock, 180° hdmi adapter, and a the screen. Here's the youtube video I made on it:
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
Printablesljboski
M2-M8 Socket Holder (1/4inch)
1/4inch M2-M8 Socket holder for pegboard. Has 0.3-inch holes on the back to put your pegboard hooks. Holes are spaced the normal width of US pegboards (1 inch apart). I printed my own hooks which had a longer part underneath to hold the…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesHandsomePotato
diatone 4inch GTB 154 shell
A simple case for the diatone GTB154 4inch drone. Print twice using vase mode/spiralize outer contour. Scale one of the two prints to 102% so it will slide over the other. This design has a little more space for the canopy so it can be…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesRodrigo Sclosa
Freezillion X8 4inch New Parts and Mounts
This a newer parts and mounts that i've designed and grab some for another people... This has a new Top plate with Caddx Vista holes and space for a USB-c mount to esay access from top... If you need some pictures and how to use it,…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesNiels
Vesa 100x100mm 1/4inch thread mount
for the dutch broadcast of ESPN Edivisie we use multiple ccd cameras for the facecams of the EA Sports FC 2X players. after using a lot of gaff tape something more professional had to come. things you need: - M4x16mm screws with a curved…
- Downloads
- 9
- Likes
- 3
- Rating
- 0
P
PrintablesTomasz Kustrzynski
Hex bit adapter 1/4inch to 4mm (STEP included)
Simple bit adapter. How to print print vertically no supports needed
- Downloads
- 9
- Likes
- 4
- Rating
- 0
P
PrintablesTheOddUncle
1/4inch-20 Threaded Nut Capable of Holding Wire/Cord
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn hard skills and test out…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesCS
Tube end piece - bumper 3/4inch 19mm
TPU, full walls, 3 top/bottom layers. Gyroid fill 10% for a little bit of softness/bumper effect. To be printed with the opening upwards.
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesTheOddUncle
1/4inch-20 Drywall Plug
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn hard skills and test out…
- Downloads
- 5
- Likes
- 4
- Rating
- 0
P
Printables友貴 鈴木
SK11 OneTouch Socket Holder 1/4inch Replace
SK11 Socket Holder Replace Parts
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesJib
4inch E-Paper Spectra 6 - Lanyard Enclosure
A compact snap-fit enclosure for mounting a e-paper display to the Flipper Zero. Features a clean front bezel, rear access for wiring, and integrated lanyard loops for everyday carry. The case uses 4x 2.5mm screws and a custom blank pcb…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesGockel93
Fanatec Club Sport V2.5 Vocore 4Inch
Hi, habe eine aufwendige Halterung entwickelt um das Vocore 4inch Display auf ein Fanatec ClubSport V2.5 zu montieren. Ich habe versucht so Dünn wie möglich vorzugehen damit es nicht zu Gross auf dem Lenkrad wirkt und denke dies ist mir…
- Downloads
- 0
- Likes
- 1
- Rating
- 0
P
PrintablesPeter Lembke
CharZam Bracket for WaveShare 4inch TFT touch
If you want to mount this TFT screen in a box then you need some way to keep it in place. This is a bracket for WaveShare 4inch TFT Touch Shield if you are not mounting the screen on an Arduino card. For example if you want the screen to…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
Large Eye Wool Needle 10cm 4inch
Sewing Needle for thick yarn/wool/ribbon crafts. 10cm 4inch Recommend print with PLA using max quality .2mm nozzle/.06mm layer height with a 2 layer brim. model can be scaled down easily by 50%, so a .4mm nozzle should suffice. Tree…
P
Printables
Helldivers 2 Coaster 4inch/102mm
Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX
P
Printables
4inch extra screen
Turned a 4inch HDMI Display-C into a second screen for your laptop. uses, 4 m3 screws, 4m3 heatset inserts, micro usb to usb, small usbc dock, 180° hdmi adapter, and a the screen. Here's the youtube video I made on it:
P
Printables
esp32-2432S028 Display Stand 2.4inch
A display stand for the cheap yellow esp32-2432S028 with USB-C Category: DIY
P
Printables
Belt's buckle (1.4inch remix)
Buckle for 36mm/1.4inch width belt. Print Settings Printer Brand Prusa Printer MINIIS Resolution .15 mm Infill 100% Filament Prusament PLA Recycled Build Plate Textured steel sheet Added paint-on fuzzy skin to imitate the feeling of the…
P
Printables
Giant Articulated Viper Snake 95cm / 37,4Inch - Flexi - Print in Place - No Supports
I'm glad to present you the articulated Giant & small Viper This Model is fully Articulated, Print in Place and printable without Supports. The Joints are strong and sturdy. This Model is scaleable, make shure the Joints work fine. Here…