Lado Exhaust Duct - 90° Adapter Mod, Core One Low Profile Side UP / DOWN Exhaust Duct, 90 degree, 100mm 10cm 4inch Hose elbow fitting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 90° Adapter for The Lado Exhaust System, Sleek Appearance with Concealed Screw Hole, Protrudes Only 75mm From the Back
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 23
- Makes
- 0
- Views
- 532
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
A 90° Adapter - Mod for Lado Exhaust System
This is an add-on for the original Lado Exhaust by @jesh
Keeping the duct protrudes only 75mm from the back of your printer.
Feature
- Flexible 90° adapter for turning UP or DOWN, in both LEFT and RIGHT.
- Sleek appearance with concealed screw hole, and an unobstructed interior for better airflow.
- Print in-place with no support needed.
- Use standard M3 screw, screw-in with no nut required.
- Fit your Core One in a very tight space, put the polluted air out and keep you healthy.
- Provide .STEP file for further adjustment.

▲ Having limited space like me? Lado is your good friend.
___________________________________
Notes
- Require ball head HEX screwdriver to screw the screws.
- Placement for support-free printing, please refer to the 3mf file or the picture below.

___________________________________
You are good to go 😊
☕ Please consider downloading, leaving a like/review, adding this to your Core One collection, and sharing with your friends!
💰 As a student who study Archaeology, I do all these by myself in my spare time, and am self-funded.
I do not accept donations. If you wish to give something back, please consider using my referral code when purchasing from Prusa: @JamesW_2136542 (enter at the check-out)
Hope you find this helpful!
Happy printing, and may the freedom be with you.
___________________________________
Change log
- 20251119 rev1 v2
Created.