1 / 9
Lado Exhaust Duct - 90° Adapter Mod, Core One Low Profile Side UP / DOWN Exhaust Duct, 90 degree, 100mm 10cm 4inch Hose elbow fitting — zdjęcie 1
1 / 9

Lado Exhaust Duct - 90° Adapter Mod, Core One Low Profile Side UP / DOWN Exhaust Duct, 90 degree, 100mm 10cm 4inch Hose elbow fitting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 90° Adapter for The Lado Exhaust System, Sleek Appearance with Concealed Screw Hole, Protrudes Only 75mm From the Back

Ocena
5 / 5
Polubienia
8
Pobrania
23
Wydruki
0
Wyświetlenia
532
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

A 90° Adapter - Mod for Lado Exhaust System

This is an add-on for the original Lado Exhaust by @jesh
Keeping the duct protrudes only 75mm from the back of your printer.

Feature

  • Flexible 90° adapter for turning UP or DOWN, in both LEFT and RIGHT.
  • Sleek appearance with concealed screw hole, and an unobstructed interior for better airflow.
  • Print in-place with no support needed.
  • Use standard M3 screw, screw-in with no nut required.
  • Fit your Core One in a very tight space, put the polluted air out and keep you healthy.
  • Provide .STEP file for further adjustment.

  
▲ Having limited space like me? Lado is your good friend.

___________________________________

Notes

  • Require ball head HEX screwdriver to screw the screws.
  • Placement for support-free printing, please refer to the 3mf file or the picture below.

 

___________________________________

You are good to go 😊

☕ Please consider downloading, leaving a like/review, adding this to your Core One collection, and sharing with your friends!

💰 As a student who study Archaeology, I do all these by myself in my spare time, and am self-funded. 
I do not accept donations. If you wish to give something back, please consider using my referral code when purchasing from Prusa: @JamesW_2136542 (enter at the check-out)

Hope you find this helpful!

Happy printing, and may the freedom be with you.

 

___________________________________

Change log
  • 20251119 rev1 v2
    Created.

 

 

 

Tagi