1 / 1
4inch Kick Drum Microphone Port
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a kick port for my kit, so i made one!
- Rating
- 4.667 / 5
- Likes
- 44
- Downloads
- 299
- Makes
- 3
- Views
- 1,796
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
I needed a 4inch kick port for my floor tom conversion. Why pay $50+ for a plastic ring when you can print one?! Ive even added a screw so it can be removed/replaced later. It took me a couple of iterations to find a light weight and strong design.
Guide printed at 0.2mm layer hight, 20% infill.
Plate printed at 0.2mm layer hight, 20% infill.
Screw printed at 0.21mm layer hight, 20% infill.
installation:
- print guide and mark out hole. Cut using sharp blade.
- print plate and push through hole
- print screw and screw onto back tightly