Fanatec Club Sport V2.5 Vocore 4Inch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Habe ein Gehäuse entwickelt um ein Vocore 4inch Display an das Fanatec ClubSportV2.5 so smart wie möglich zu Montieren.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Standard Digital File License
Hi,
habe eine aufwendige Halterung entwickelt um das Vocore 4inch Display auf ein Fanatec ClubSport V2.5 zu montieren. Ich habe versucht so Dünn wie möglich vorzugehen damit es nicht zu Gross auf dem Lenkrad wirkt und denke dies ist mir gut gelungen.
Materielliste:
Vocore 4inch Display https://vocore.io/screen.html
4x Einschweissmutter M3 3x4.5
4x M3x4mm Schraube, Schraubenkopf Durchmesser in meinen Fall 5.6mm
2x M4x20 Senkkopf (Originale M4 Schraube vom Lenkrad wurde durch diese ersetzt weil der Kopf kleiner ist und somit ich eine kleine Bautiefe entwerfen konnte, die beiden oben Schrauben können übernommenwerden)
Usb C Spiralkabel, in meinen Fall dieses: https://www.galaxus.ch/de/s1/product/axagon-bucm-am10tb-twister-kabel-usb-c-auf-usb-a-20-060-m-usb-20-usb-kabel-17696122
Kabel wurde mit Kabelbinder an die Kabelhalter befestigt 3 Stück an der Zahl.
Alle schrauben vom Gesamten Zusammenbau bitte mit Gefühl anziehen!!!
Bitte lasst ein Like und Kommentar da als Wertschätzung für die Arbeit, sollte eigentlich zuerst in den Verkauf gehen aber bin ja nicht so.
Gruss Gockel
Hi,I've developed a complex mount to attach the Vocore 4-inch display to a Fanatec ClubSport V2.5 steering wheel. I tried to make it as thin as possible so it wouldn't look too big on the wheel, and I think I succeeded.
I've developed a complex mount to attach the Vocore 4-inch display to a Fanatec ClubSport V2.5 steering wheel. I tried to make it as thin as possible so it wouldn't look too big on the steering wheel, and I think I succeeded.
... Materials list:
Vocore 4-inch display https://vocore.io/screen.html
4x M3 3x4.5 weld nuts
4x M3x4mm screws, screw head diameter in my case 5.6mm
2x M4x20 countersunk screws (The original M4 screws from the steering wheel were replaced with these because the head is smaller, allowing for a shallower installation depth. The two screws above can be reused.)
USB-C coiled cable, in my case this one: https://www.galaxus.ch/de/s1/product/axagon-bucm-am10tb-twister-kabel-usb-c-auf-usb-a-20-060-m-usb-20-usb-kabel-17696122
Please tighten all screws carefully!!!
Please leave a like and a comment as a token of appreciation for the work. It was originally intended for sale, but I'm not that fussy.
Cheers, Gockel
