wanhao duplicator i3 alternative spool mount.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I just dont like the stock spool holder. even though its metal it is still weak.. i find it sagging as soon as i put…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I just dont like the stock spool holder. even though its metal it is still weak..
i find it sagging as soon as i put on a roll of filament.
here is an alternative to the stock holder. (much stiffer)
also has a hole for a lockdown screw so once you slide it on the frame you can lock it in place with a M3-.5x 16mm or longer. socket cap screw.. (might want to put a piece of tape where the screw contacts . it can leave a circular scratch from the screw in the paint.)
Instructions
in cura.
0.2mm layer height
2mm shell thickness
1mm top and bottom thickness
15% overlap infill
grid infill
Category: 3D Printer Parts