1 / 8
All in One Test — zdjęcie 1
1 / 8

All in One Test

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fast & Efficient! 🚀 Complete All-in-One test: Retraction, Overhangs, Bridges, Embossed Text & Tolerances. Prints in <1h

Ocena
0 / 5
Polubienia
3
Pobrania
136
Wydruki
0
Wyświetlenia
434
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ultimate All-In-One Calibration Test (Fast & Lightweight)

Stop wasting time and filament! This compact All-In-One Torture Test is designed to push your printer to its limits while being extremely efficient.

In a single print, you can calibrate:

  • Retraction: Fine-tune those stringing issues with the precision spikes.

  • Tolerances: Dedicated circular slots to test fitment with the included Tolerance Sticks.

  • Embossed Text: Test your printer's ability to render sharp, readable raised lettering and fine wall details.

  • Overhangs: Test angles from 40° up to 90° to see where your cooling needs help.

  • Bridging & Sharp Corners: Ensure your dimensional accuracy and cooling are on point.

🚀 Key Features:

  • Ultra Fast: Prints in less than 1 hour on most modern printers (Bambu Lab/Orca).

  • Eco-Friendly: Uses less than 50g of filament.

  • Plug & Play: * Original .3MF for Bambu Studio (pre-configured).

    • Original .3MF for OrcaSlicer.

    • Individual STL files included.

    • Separate Tolerance Sticks for a complete kit.

🛠 Printing Tips:

  • Material: Optimized for PLA, PETG, or ABS.

  • Supports: NO SUPPORTS needed. It's a torture test!

  • Layer Height: Recommended 0.2mm or 0.16mm for the best text clarity.

  • Infill: 10-15% (Grid or Gyroid recommended).

If this model helped you get the perfect settings, please consider leaving a Boost 🚀 and sharing your photo makes!

Tagi