Liczymy pasujące modele…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
This is my take on a simple and effective retraction test model, designed to help you fine-tune your 3D printer's settings. Recommended Print Settings: Layer Height: 0.2 mm Infill: 0% Walls: 2 Material: Tested with PLA, but PETG should…
I am very grateful to the author of this detail for the simplicity of solving the problem of coiling plastic with an empty coil. Here is the original model:…
If your filament is not retracting properly (the spool doesn’t rotate) and instead unwinds inside the Qidi Box instead of going back onto the spool — this model fixes that problem. This spacer reduces excessive pressure between the…
I would like to thank Akasilentcreed for this design. Happy printing
A parametric retraction tower that can be used to determine the optimal retraction distance with many travel lengths.
When replacing rear brake pads on newer Honda Accords or Civics with electronic parking brakes (EPB), the EPB must be retracted before compressing the caliper piston. If you don't have a OBD2 scan tool capable of retracting the EPB via a…
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
I have a Wanhao i3+ (with Microswiss hotend) which, let's face it, is a positively geriatric printer at this point. It's always struggled with getting clean seams on certain prints after a move, no matter how much or how little retraction…
diameter : first circle:3mm second circle: 5mm square:4x4mm and last random shapes separated by 2mm the whole is 80x20x41mm (without a base 40mm)
This is a 20x20x20 mm calibration cube designed to test your 3D printer's accuracy and optimize print settings. The cube includes features for measuring dimensional precision and analyzing filament retraction. Perfect for fine-tuning your…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
Fixes Creality CFS retraction issues with small spools that can't reach the bumpers on top of the CFS lid. It's a more comfortable solution to spool rings. Comes in 2 variants with different sizes from 1mm to 10mm. The size is the…
Model pro Retraction Stress Test je skvělým nástrojem pro optimalizaci nastavení retrakce na 3D tiskárně. Umožňuje snadno identifikovat problémy, jako jsou stringing (vlásečnice) nebo nedokonalosti při přechodu mezi tištěnými částmi. Díky…
A fast retraction test that also tests your printer's overhang up to 75°! This is a useful calibration test tool that uses less than 2g of filament! Feedback and Makes are always appreciated, If you're up for another challenge, check out…
Making the model solid, it only took about 1.5 meters of filament, great test to be able to run out some scrap filament shorts you might have laying around!
Enjoy this quick and easy print and test your printers capabilities. I made this test with time and wastage in mind after revisiting an old model I uploaded back in 2017. (https://www.thingiverse.com/thing:2563909) The models are as…
Played around and made the model, really quick fun print to test the perimeters of different filament/part cooling fans. 0.2mm layer height, increase model size to 120% if the slicer struggles to slice the walls of the tubes.
Like me, if you dont have time, or just not enough filament, just use the smaller Temptowers. Based on the "All in One Temperature & Bridging Tower - PLA & PETG GCode included" from Tronnic, and the remix “Prusa Mini Temptower for PLA,…
Ender 3 V3 SE Extruder Visualizer. Zeigt die Bewegungen des Motors für den Extruder. Die Retraction ist sichtbar. 5mm Innenaufnahme. Wird einfach aufgesteckt.
Join two TPFE tubes together with buffer space in the middle for retractions. Useful to place before the long tube to a filament dryer, for example, so the extruder doesn't have to push the filament all the way back to the spool. I…
Hallo zusammen, hier ein paar kleine Würfel, um Retraction, Flow, Layerbreite und Temperatur zu kontrollieren. Viel Vergnügen ;) Hello together, some small cubes to calibrate retraction, flow, layerwidth and temperature. Have fun ;) Print…
Should fit most of the calipers out there in the VAG family (VW, Audi, Skoda, etc). It fits a ½ inch shaft. The images only shows a version with 3 pins but there is an additional pin added to support older versions of pistons as well.…
During my retraction testing I found out, that simple tower-to-tower retraction tests will tune retractions mostly for these specific geometries. But what if your model contains thin wall? Or some larger part with longer extrusion? You…
Here's my bare minimum retraction test, just three 4 mm wide towers 50 and 10 mm apart from each other. This is the fastest stringing test available. To get good adhesion print with 5mm brim. If you like this design you can like this, tip…
It's a simple model I made that works great for uncut people that like to keep their skin away from the head. Well it might be weird for some but other people like me really need something that works. I bet I'm not alone ;) …oh c'mon it's…
This is my first make. I hope you like it. I am open to criticism and would be happy to receive tips Columns have a diameter of 1-8mm
i tried to print the smallest one with my old filament that was sitting out but this happened. ???????????????????????????????????→ sorry for the bad pitcher.
This is my take on a simple and effective retraction test model, designed to help you fine-tune your 3D printer's settings. Recommended Print Settings: Layer Height: 0.2 mm Infill: 0% Walls: 2 Material: Tested with PLA, but PETG should…
Hello ! I created fast and quick retraction test. I use it for retraction tuning and it's very helpful. I added also single one tower and you can copy it and set range to another one by yourself. Feel free to comment and if You like it…
I had problems with the fan shroud, so I needed a directional overhang / curling test. It will test overhang at four angles (30 to 60°) in all directions for curling issues bridging at 30, 50 and 70mm arcs at 2.5, 5 and 7.5mm radius (5,…
A Simple Retraction Test To See How Much Strings Your Printer Has Between Different Objects
Simple retraction and stringing test for your printer. Every step can be used to indicate when and what settings have been changed with a script you added and help you find the correct value. Can be scaled up, down, be printed with…
This is a functional calibration model, designed to test the effectiveness of extruder retraction speed and distance parameters on a 3D printer. The goal is to find the configuration that minimizes or completely eliminates the stringing…
Retraction Test – Optimized Version for Printables I've made significant changes to the original retraction test from Thingiverse: Retraction Test – Optimized Version for Printables…
I had a mixup during ordering the parts and accidentally ordered the 500g retractable device (used for the 1 and 1S) instead of the one meant for the ZERO. Thus this remix was made to hide my mistake :D So far it seems to work great.
Remixed the original retraction towers to have a minimal base, saves minimal time and material. Original file by 3DPrintInGreece on Thingiverse: https://www.thingiverse.com/thing:4639020 Print Settings Printer Brand: Creality Printer:…
I am very grateful to the author of this detail for the simplicity of solving the problem of coiling plastic with an empty coil. Here is the original model:…
Most vertical meshes have lots of retractions, which takes time and can cause stringing. This model has none! Print in vase mode. For a permeable bottom, set the bottom infill to less than 100%. Print Settings Printer Brand: Prusa…
Retraction calibration tower test dual tower H = 100mm
If your filament is not retracting properly (the spool doesn’t rotate) and instead unwinds inside the Qidi Box instead of going back onto the spool — this model fixes that problem. This spacer reduces excessive pressure between the…
This is the first thing that came to mind when I saw the “Print Tables” design contest. While designing, I realized it could also be used as a good retraction tower test, if I just modify the legs a little. Happy printing! The model is…
Designed with using firmware retraction in mind. Tested with 0.4 and 0.6mm nozzles at layer hights up to 0.4mm. If a smaller nozzle is used, scaling it may be an option. First picture shows the default dimensions and distances, second…
A couple of models, recreating the worst conditions, to test filament retraction in order to avoid "hairs"
Переработка охлаждения холодной зоны для QIDI Plus4 с установленным хотендом Phaetus Conch. Проект создавался не как декоративный мод, а как решение конкретной технической проблемы штатной головы QIDI Plus4. Стоковая система охлаждения…
Just a quick printer test I made. I was tired of the majority of tests taking up to an hour to print. This design only takes 15-20 minutes on my CR-10S.
An advanced retraction test that offers 3 testing poles with a redesigned base plate for better adhesion
Adapted this stringing and retraction test for use with the 8 Tool INDX. I have already colored it based on toolhead to make it quick to use. Let me know if you want any changes!
Retraction Test Towers with different distance between the towers. I usually start with retraction distance test. Then I use the setting/retraction distance (number of floor plan) that has the least ammount of stringing (after reviewing…
Got rid of the wording at the bottom of the retraction test and made the base of the test flat When you print a lot of these, I feel it adds unnecessary printing time Category: 3D Printing Tests
Use post processing plugin in Cura or other option in your slicer of choice. Height of the base - 1mm, height of the single block - 5mm.
This is a retraction test for large bed printers such as the Ender 5 Plus. It forces the head to move and retract across multiple objects near and far. First Picture shows the filament worms with a 4mm retraction at the fastest retraction…
I made this model for testing my retraction settings. I made a video about this on my Youtube channel: https://youtu.be/ed3zEa4WLTo Category: 3D Printing Tests
A simple retraction test. Best test consistency with no infill. Uses very little material for base, so the test part itself starts quite quickly, easily within a minute. Print Settings Rafts: No Supports: No Resolution: 0.1-0.2 Filament:…
A tiny retraction test model. Includes 5 different gaps between the towers: 2.5 mm 5 mm 10 mm 15 mm 20 mm
The Advanced Retraction Test allows the user to tune retraction while taking into account variable distance. This uses 4 pillars that start at 5mm tall and increments by 5mm. 5, 10, 15 and 20mm tall. This allows you to change retraction…
I tried tuning retraction setting for TPU. Each test is just in 8 minutes, but I needed to remove printed part and print part in new setting. I hope to start print for several setting at once, so I merged some settings. From the front,…
I tried tuning retraction setting for TPU. Each test is just in 8 minutes, but I needed to remove printed part and print part in new setting. I hope to start print for several setting at once, so I merged some settings. Original design is…
This model gives you the opportunity to test the retraction and the dimensional accuracy. The left tower has an hexagon section (distance 10 mm) in order to check dimensional accuracy in various standard angle. The right tower has a round…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
Calibration de la rétraction avec une tour de rétraction (Fait avec Cura 4.12) La tour de calibration permet de faire plusieurs test de retraction en faisant varier soit la vitesse soit la distance de retraction. La tour se compose d’une…
Tune your printer's retract and bridging features individually or all at the same time. Good luck!
Fast (8 mins) retraction test print, including a single-wall cube, and five towers. I had a problem with my extruder's retraction, and needed an object that was fast to print to diagnose the problem. Print instructions 0.4mm nozzle,…
I designed this print with a thin base so you don't have to wait for it to finish before the pillars start. Its a nice quick way of checking your retraction settings super quickly with ease!
This is an example of what you can expect monthly through becoming a Patreon. On top of my 3D printed speaker drivers and cabinets, you also get practical 3D prints which don't require anything more than the filament itself. A geometric…
This is just a small print to test your retraction on your printer. Category: 3D Printing
It's a silverware drawer organizer. It's also a fairly useful retraction test that can help you tune your ideal temperature and fan for your filaments, though if you're a hardcore optimizer, you'll of course want something that tapers…
Material-saving distance tower test model suitable for dialling in most of the printing profile parameters, including retraction, flow/extrusion rate, temperature, bridge, ironing settings, and certainly many more. Optimized for 0.4mm and…
Mini design for using little material No support required
This is a more thorough stringing torture test. This prints best with a brim and tests both your printer and you slicer to reduce stringing in multiple directions. This is not originally my file. I would be happy to give attribution but I…
A low material retraction test object. Contains 10mm, 20mm, and 40mm retraction test distances between the edges of the pillars. Print Settings Rafts: No Supports: No Resolution: 0.15 Infill: 20 Notes: Print with 0.15mm layer height with…
This is basically an inverted standard calibration cube, and prints in about the same amount of time. But this one is hollow to test retraction, overhang angles, and an insanely difficult bridge at the top. The cube measures 20x20x20mm…
use a .2 mm layer height I also recommend scaling it up about 10 to 20%
★·.··.·★ 👋 Hello😁 ★·.··.·★ Before reading the description I recommend in the future to look at the collections created by me for better service for high projects is to distinguish them better 💚MAKERWORLD→ COLLECTIONS 🇬🇧 RETRACTION TEST 🇮🇹…
RAM stick storage Designed for the Stanley organizer and it‘s a bit of retraction test https://www.stanleyworks.de/products/detail/Produkte/AUFBEWAHRUNGSL%C3%96SUNGEN/Organizer+_+Beh%C3%A4lter/Kleinteilemagazin+mit+9+Schubladen SODIMM and…
I have designed these models and manually customised the G Code to print these tests with desired test parameters. Single wall models for speed, each model taking about 20 minutes to print. Stl files are included if you desire to…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
Remixed the wonderful 10 Minute Mini Calibration Test for Oozing/Retraction at Different Distances by MrTestOne to also add bridging on the last layers. This probably takes more than 10 minutes now to build, but may be useful for some.
General Information The included .3mf file can be opened with the latest PrusaSlicer release ( https://github.com/prusa3d/PrusaSlicer/releases ) and modified for your hardware configuration in order to create retraction tuning gcode that…
Hi, all this is just a simple retraction test I threw together. When printing, it's best to start on a lower retraction value and build your way up slowly by something like 0.2mm each time, bearing in mind the max retraction you can get…
Test your printer settings on calibration cube, bridge, overhang & retractions all at once.
Needed a smaller, faster test for stringing. uses less than 1 gram.
I Made this overkill model because i had problem with my mk3s+ getting stuck fillament when printing with lots of retraction
I made this model because I wanted a better way to tune retraction. I needed to assess retraction performance on both small and large travels and be able to tune the retraction minimum travel (Cura), which decides the travel distance…
Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: no need Category: 3D Printing Tests
1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator
WORK IN PROGRESS This is for the AnkerMake M5, specifically the retraction indicator mod. (see images) The mod is done by detaching the bowden tube and adding a piece of PTFE tube. The new segment will now raise during retraction so it…
Calibration Test Circular – Retraction & First Layer Check 🎯🖨 Not sure if your 3D printer is calibrated correctly? This Calibration Test Circular is here to help! 💡 Test your printer's retraction settings and first-layer accuracy with…
You need to have good cooling and a perfectly tuned printer. If you dial in the retraction settings perfectly, you will be impressed how cool it looks. Pro tip: If there is a little bit of stringing a quick blast with a heatgun/hairdrier…
A stringing test for your 3d printer to test it's retraction
