1 / 3
Qidi Box Filament Retraction Fix (Gear Pressure Spacer) Q2 Q2C Plus 4 Max 4 — zdjęcie 1
1 / 3

Qidi Box Filament Retraction Fix (Gear Pressure Spacer) Q2 Q2C Plus 4 Max 4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model reduces excessive pressure between the extruder gears by slightly spacing the motor from the front assembly.

Ocena
5 / 5
Polubienia
71
Pobrania
272
Wydruki
0
Wyświetlenia
2029
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

If your filament is not retracting properly (the spool doesn’t rotate) and instead unwinds inside the Qidi Box instead of going back onto the spool — this model fixes that problem.

This spacer reduces excessive pressure between the extruder gears by slightly spacing the motor from the front assembly. By loosening the mechanism, the clutch can work properly again, allowing the filament to move more freely. This improves retraction and prevents slipping or grinding.

🔧 Installation:

Place the spacer between the extruder motor and the front assembly.

📏 Sizing:

The default thickness is 7mm, which worked best for me. You can easily scale the model to fine-tune the pressure depending on your setup. You can also slightly lengthen the model for easier assembly, depending on your printer's tolerances.

🧱 Recommended materials:

ABS or ASA (for better heat resistance and durability)

Let me know if it works for you 👍

Tagi