Small and fast retraction test print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on a small and fast retraction test print I use for testing my retraction settings. Only uses 0,95 gr!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
This is my take on a simple and effective retraction test model, designed to help you fine-tune your 3D printer's settings.
Recommended Print Settings:
Layer Height: 0.2 mm
Infill: 0%
Walls: 2
Material: Tested with PLA, but PETG should work as well
Use this model to calibrate:
Retraction Distance
Retraction Speed
Travel Speed
After printing, examine the gaps between the towers. If you notice stringing or blobs, try adjusting your retraction settings and reprint for comparison.
Tip: Make sure you're using dry filament, and don’t hesitate to tweak the printing temperature. Running a temperature tower beforehand can help you determine the ideal temp for your specific material and setup.