1 / 3
Mount for BTT ADXL345 on MicroSwiss NG DirectDrive — zdjęcie 1
1 / 3

Mount for BTT ADXL345 on MicroSwiss NG DirectDrive

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed a mount for BigTreeTech ADXL345 sensor to mount on MicroSwiss NG direct drive extruder.

Ocena
0 / 5
Polubienia
7
Pobrania
35
Wydruki
0
Wyświetlenia
159
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed a mount for BigTreeTech ADXL345 sensor to mount on MicroSwiss NG direct drive extruder.

 

Remove two lower screws and replace with longer ones (I used 3x20 mm self-tap screw).

To mount ADXL on adapter I used two small M3 screws. You need to tap holes with M3 tap drill. 

Tagi