1 / 3
Mount for BTT ADXL345 on MicroSwiss NG DirectDrive
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed a mount for BigTreeTech ADXL345 sensor to mount on MicroSwiss NG direct drive extruder.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a mount for BigTreeTech ADXL345 sensor to mount on MicroSwiss NG direct drive extruder.
Remove two lower screws and replace with longer ones (I used 3x20 mm self-tap screw).
To mount ADXL on adapter I used two small M3 screws. You need to tap holes with M3 tap drill.