Dry Box Base Bracket Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glueless Dry Box Base with Dovetail Feet.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: I made this so that dryboxes could be mounted. They are a tight fit. After some thought I've been thinking for doing a lot looser version. That way you only need one fixed to the mount that you could just take an of your boxes and quickly insert it into the mount. Any thoughts on this?
This Bracket Slips on to the lid. It slides on and then has two clips to hold it in place. There is dovetail feet so that various mounts can be designed to slip over. I designed the clips at the top to print with no supports. I would Print the test piece. It will allow you to test whether the Connector bracket will print correctly without supports. You can also test removing the temporary support.