Router Guide Rail / Track Saw Track Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple adapter to use routers with 8mm rods with 85mm spacing together with track saw tracks.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A simple adapter to use routers with 8mm rods with 85mm spacing together with track saw tracks.
For assembly, threaded inserts as well as compatible screws are required.
I personally used ones intended for wood, which are prone to split the 3D print, if you have heat set inserts use those.
To enable this, the included FreeCAD file is parametric. One can adjust the holes for the threaded inserts, the tolerance of the track, rod spacing and diameter (and all other parameters of the design).
All in all this design should be adjustable for most routers and tracks.
The design includes a hole for an (M8) hex bolt to fasten an additional handle, for example this one: https://www.printables.com/model/801342-fiskars-cutting-height-adjustment-knob-m8
New:
Added version with drop-in hex nuts instead of threaded inserts, see last picture for installation. This is the recommended version to use.
Edits:
V1.1: Fixed diameter of threaded inserts not being updated correctly.