Mask Series Vol.1 – Viking Warlord (Wall Display Mask)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Viking warlord display mask — bold helm silhouette and rugged detail, designed for clean FDM printing and wall mount.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Part of Mask Series Vol.1: Warlords & Rituals — a set of display masks built for strong silhouettes, crisp detail, and reliable FDM printing.
The Viking Warlord mask is a battle-hardened Nordic helm face with heavy brow lines and rugged metal detailing — made to look powerful on a wall, in a games room, or as a streaming backdrop.
Print Notes (Bambu A1 / PLA)
Material: PLA (Matte PLA recommended)
Layer height: 0.20 mm (0.16 mm for a premium finish)
Walls: 4
Infill: 10–15% Gyroid
Supports:
Flat-backed wall version: usually No
If your model has deep undercuts: use Tree supports only where needed
Brim: Optional (5–8mm) if edges lift
Wall Mounting
Choose one method:
Add 2 rear mounting holes near the top (simple + secure)
Add a keyhole slot on the back (single screw)
Flat back can also work with Command strips (lightweight wall display)
Scaling
Best wall presence: 180–220mm wide
Smaller scales work, but helmet detailing reads best above ~160mm
Colour Suggestions (AMS optional)
Helmet: dark grey / gunmetal
Accents: bronze / gold
Quick paint finish: black wash + dry brush silver to make edges pop
Main category
Wall-mounted