1 / 1
Mask Series Vol.1 – Viking Warlord (Wall Display Mask) — image 1

Mask Series Vol.1 – Viking Warlord (Wall Display Mask)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Viking warlord display mask — bold helm silhouette and rugged detail, designed for clean FDM printing and wall mount.

Rating
0 / 5
Likes
13
Downloads
36
Makes
0
Views
184
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial

Part of Mask Series Vol.1: Warlords & Rituals — a set of display masks built for strong silhouettes, crisp detail, and reliable FDM printing.

The Viking Warlord mask is a battle-hardened Nordic helm face with heavy brow lines and rugged metal detailing — made to look powerful on a wall, in a games room, or as a streaming backdrop.

Print Notes (Bambu A1 / PLA)

  • Material: PLA (Matte PLA recommended)

  • Layer height: 0.20 mm (0.16 mm for a premium finish)

  • Walls: 4

  • Infill: 10–15% Gyroid

  • Supports:

    • Flat-backed wall version: usually No

    • If your model has deep undercuts: use Tree supports only where needed

  • Brim: Optional (5–8mm) if edges lift

Wall Mounting

Choose one method:

  • Add 2 rear mounting holes near the top (simple + secure)

  • Add a keyhole slot on the back (single screw)

  • Flat back can also work with Command strips (lightweight wall display)

Scaling

  • Best wall presence: 180–220mm wide

  • Smaller scales work, but helmet detailing reads best above ~160mm

Colour Suggestions (AMS optional)

  • Helmet: dark grey / gunmetal

  • Accents: bronze / gold

  • Quick paint finish: black wash + dry brush silver to make edges pop


Main category

Wall-mounted

Tags