1 / 9
BRÄNNBOLL Gaming Station Desk Skadis Extension Kit — zdjęcie 1
1 / 9

BRÄNNBOLL Gaming Station Desk Skadis Extension Kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extensions for installing a small Skadis section in the side of the short lived BRÄNNBOLL Gaming Station Desk.

Ocena
0 / 5
Polubienia
11
Pobrania
15
Wydruki
0
Wyświetlenia
207
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Remixed to use as extensions for installing a small Skadis section in the side of the BRÄNNBOLL Gaming Station Desk.

You'll need:
Print two “A” and two “B” sections plus the Connectors.
M3 x 16mm screws and nuts - 16 of each.
One SKÅDIS Pegboard, 36x56 cm.
To install in the BRÄNNBOLL Gaming Station Desk, 8 screws or double sided tape (3M 414 Scotch).

The kit can be installed in either right or left sides (or both) of the BRÄNNBOLL Gaming Station Desk.

The Screw version will need holes drilled in the Skadis section for assembly, and holes drilled in the BRÄNNBOLL desk frame for installation (I used some flat head #6 wood screws).

The Glue version uses existing slots for assembly, and can be installed in the desk frame with double sided tape (3M 414 Scotch).

Print as pictured. No supports needed. 0.2mm layer, 4 walls, 10% infill Gyroid.

Tagi