1 / 3
Skil Pwrcore 20 battery to Ryobi tool adaptor — zdjęcie 1
1 / 3

Skil Pwrcore 20 battery to Ryobi tool adaptor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skil Pwrcore 20 battery to Ryobi skins

Ocena
0 / 5
Polubienia
8
Pobrania
44
Wydruki
0
Wyświetlenia
245
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Cordless tool battery adapter.

Skil PWRCORE 20 Battery to Ryobi skins

Extra requirements

2 x 6mm piggyback terminals x2 plus small zip ties to secure them

2 x 6mm spade terminals

4 x M3 nuts

4 x M3 10mm socket head bolts

2 x wires

Assembly Guide

I find if I run a 3mm drill bit through all the bolt holes, it helps with getting the bolts in smoothly.

Remove the insulation from the spade terminals and install one on one end of each wire and feed it through the holes in the base plate, matching the polarity. Use some pliers to push the terminals in for the last few millimeters, they should fit nice and snug.

Load the nuts into the base plate, then test fit the top section so you can cut the excess wire exiting the top and install the piggyback terminals. Then bolt the top and bottom sections together. Secure the piggyback terminals in position with the zip ties to the mounting post. Install the top cover, you can super glue in place if needed.

I can adapt to other slide in style batteries, just let me know and I can probably make it.

If you are looking for terminals I recommend using the image search function in Aliexpress. If you are in Australia, the Jaycar spade terminals work best for me, they seem to be made of a stronger metal than all other ones I have come across.

If you like this model, please throw me a like.  Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!

Tagi