1 / 9
Framework 16 dGPU Riser (Mod) — zdjęcie 1
1 / 9

Framework 16 dGPU Riser (Mod)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It raises your Framework 16's Expansion Bay Shell Cover for superior airflow and lap comfort.

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
203
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

I made this mod Expansion Bay Shell Cover for Framework 16 with dGPU only. The modification is I added a riser for air cooling and to avoid the heat on your legs and changed/added the hex and slots for air flow. I inserted the threaded screw for the framework's screws. It is great, but it is not the FINAL version yet (a few things are left that I have to do). I will make an update soon.

It's required for some hardware:

  • 1 x Rubber mat (25.65 mm x 25.65 mm) and cut it half. I don't know where to buy but I found it from my parents place. Shout out to my mom!

  • 15x M2 x 2.5 x 3.2 Threaded insert. I bought it from eBay.

  •  Superglue if you print it in split. It is better than no glue. Do it before you install.

Recommend print setting:

Material: PLA HT (with no fan) or PETG. I am planning to print PC in the future. At least two-four perimeters and 0.15mm STRUCTURAL layer height

Speed: Perimeters: 75 mm/s, external perimeters: 35 mm/s,  Infill: 100 mm/s, Top solid infill: 60 mm/s, and bridges: 35 mm/s.

Infill: 100%

Support: Tree. It will be hard to remove and please take your time. See the last two pictures.

Brim: Yes, 5mm

Orientation: Angle (see the 7th picture)

Print size: Print in 1 size recommended. But the split model is okay

A while ago, I tested it with the self-screw; it was okay but not great. I didn't like it because it made me risk possibly damaging my GPU and etc. Feel free to print it!

I would love to see your print for your Framework in the comments!