1 / 9
Framework 16 dGPU Riser (Mod) — image 1
1 / 9

Framework 16 dGPU Riser (Mod)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

It raises your Framework 16's Expansion Bay Shell Cover for superior airflow and lap comfort.

Rating
0 / 5
Likes
4
Downloads
16
Makes
0
Views
203
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

I made this mod Expansion Bay Shell Cover for Framework 16 with dGPU only. The modification is I added a riser for air cooling and to avoid the heat on your legs and changed/added the hex and slots for air flow. I inserted the threaded screw for the framework's screws. It is great, but it is not the FINAL version yet (a few things are left that I have to do). I will make an update soon.

It's required for some hardware:

  • 1 x Rubber mat (25.65 mm x 25.65 mm) and cut it half. I don't know where to buy but I found it from my parents place. Shout out to my mom!

  • 15x M2 x 2.5 x 3.2 Threaded insert. I bought it from eBay.

  •  Superglue if you print it in split. It is better than no glue. Do it before you install.

Recommend print setting:

Material: PLA HT (with no fan) or PETG. I am planning to print PC in the future. At least two-four perimeters and 0.15mm STRUCTURAL layer height

Speed: Perimeters: 75 mm/s, external perimeters: 35 mm/s,  Infill: 100 mm/s, Top solid infill: 60 mm/s, and bridges: 35 mm/s.

Infill: 100%

Support: Tree. It will be hard to remove and please take your time. See the last two pictures.

Brim: Yes, 5mm

Orientation: Angle (see the 7th picture)

Print size: Print in 1 size recommended. But the split model is okay

A while ago, I tested it with the self-screw; it was okay but not great. I didn't like it because it made me risk possibly damaging my GPU and etc. Feel free to print it!

I would love to see your print for your Framework in the comments!