IKEA Desk Screw Anchor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed to replace anchors that had been holding up the cable tray under my IKEA desk (Signum Cable Tray and…
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 831
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This was designed to replace anchors that had been holding up the cable tray under my IKEA desk (Signum Cable Tray and Vika tabletop which has now been superceded by Linnmon).
This isn't a replica of the original anchors, but has been working well so far. I previously replaced them a few times with drywall anchors that kept pulling out. I ended up settling on the 4mm full-slit design, but the others are included in case they're useful for your application.
Print Settings
Printer Brand:
RepRap
Printer:
Prusa i3
Rafts:
No
Supports:
No
Resolution:
0.4mm
Infill:
100%
Notes:
Small enough that supports were unnecessary for the overhangs. May need supports if you scale it up.
Category: Parts