Hercules Starlight Cover (Glue Required)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Decksaver-like Cover for the Hercules Starlight DJ Controller that covers all important parts. Glue Required.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This model was inspired by decksavers to protect the starlight for easy carry in a backpack.
It does not protect the ports on the sides of smaller debris, but it does protect everything sensitive on the top of the device.
Depending on your tolerance and glue application, it should hold on by friction without additional straps.
The model was split in 4 parts to increase print stability but can certainly be printed in two parts to reduce glue lines. A full model is attached in the files!
I printed all 4 parts at once in PLA with tree supports and a 0.3 layer height and achieved good results after ~12h of printing.
All parts were then glued together with usual superglue and held together great!