1 / 1
Hidden cable routing z-belt cover for "NP" no protrusion Voron 2.4 Monolith R1 build.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Z belts covers modified to use on "NP" no protrusion Voron 2.4 Monolith R1 build.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
If you are using ("NP" no protrusion) on a Voron 2.4 Monolith R1 build the pulleys in the Z drives needs to be flipped and also move the belt tensioners 6mm.
So i extended these 6mm to compensate for the move of Z-belts
I used NP only on the back on my Monolith build, so I needed one (a v22_NP) and (b_v22_NP) on the back and on the front (a v22) and (b v22) from the original model.