Schonauwen Woggle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A woggle modelled after the Scouting Schonauwen logo with whistle
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Public Domain
My scouting group "Scouting Schonauwen" has it's logo modelled after fort Schonauwen in Houten.
A long time ago I made a 3d model of this fort. A smaller time ago I made it into a woggle, and now it's here to share.
It's very important that you set the horizontal expansion setting in your slicer (known with Cura) to -0.08 if you want the brick pattern to be visible. (This is an unfortunate quirk because it was reused from a larger model). Other than that it prints without support etc.
EDIT: In prusa slicer it seems you don't need to fiddle with a "horizontal expansion". It worked out of the box for me there.
I used someone else's bush model. But I can't find the original model anymore. If you know it, shoot me a message and I'll add it to the credits.
Oh yeah the woggle also contains a whistle! :)