Schonauwen Woggle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A woggle modelled after the Scouting Schonauwen logo with whistle
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Public Domain
My scouting group "Scouting Schonauwen" has it's logo modelled after fort Schonauwen in Houten.
A long time ago I made a 3d model of this fort. A smaller time ago I made it into a woggle, and now it's here to share.
It's very important that you set the horizontal expansion setting in your slicer (known with Cura) to -0.08 if you want the brick pattern to be visible. (This is an unfortunate quirk because it was reused from a larger model). Other than that it prints without support etc.
EDIT: In prusa slicer it seems you don't need to fiddle with a "horizontal expansion". It worked out of the box for me there.
I used someone else's bush model. But I can't find the original model anymore. If you know it, shoot me a message and I'll add it to the credits.
Oh yeah the woggle also contains a whistle! :)