Right-Angle 30mm wiring gland
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Large enough ID for 3/8" split loom tubing to fit entirely through. Used on my 2017 Honda Civic bsi radar retrofit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed in TPU. I think I used 2-3 walls and low infill to keep it flexible. Use supports! I got resonable air tightness by printing so the inward end of the model faces the plate, printing the tube horzontially.
Once this part has been installed in the car, it is very difficult to remove. It can spin but cannot be removed easily do to tight tolerances. The fusion 360 file includes some parameters that you can change but I maybe didn't use them everywhere I should. There are a few main sketches that make the part.