1 / 5
Lens Hood for Voigtlander 50mm APO-Lanthar VM
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lens Hood for Voigtlander 50mm APO-Lanthar VM
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Lens hood alternative for Voigtlander 50mm APO-Lanthar VM (Leica M mount)
https://www.voigtlaender.de/lenses/vm/50-mm-120-apo-lanthar-aspherical/
FIlament - PLA (can be also ABS/ASA)
Infill - 50% (to be strong enough)
Layer - 0.2 mm is OK
Supports - not needed
Post processing:
Smooth with file file needed (little bit).
Sand paper / Scotch-Brite for matte effect (looks nice for ASA)