Mini Skis V1

Mini Skis Version 1.0!

Tested:

Material used:

• The Filament PET-G Lite Blue (~289grams for ski +65grams for supports total: ~354grams)

• Universal material strap 2-4pcs, length 40-50cm 

Settings:

• layer height 0.2-0.28 

• Print sideways

• supports for critical regions (tree)

• 15% infill grid

• 3 walls

• outer wall 0.8mm

• optional brim

Info:

My weight is 71 kg's and they work perfectly :)

They fit shoes up to ~330-340mm in length and up to ~120mm wide in the front part.

Guide:

Print two of those; they are universal (Left=Right)
You can use back straps, but I only used front ones (easier to walk).

Printing sideways gives you more strength, and the bottom surface is very slippery.

Known issues:

Overhangs are not optimised for 3D printing in that orientation.

Bottom notches are not good enough for making a grip while walking.

Mesh is not perfect ;)