1 / 26
5 Gal Husky Bin Filament Storage - F360 — zdjęcie 1
1 / 26

5 Gal Husky Bin Filament Storage - F360

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dry storage with desiccant containers for up to 5 standard 1kg spools of filament. Fusion 360 and STEP files included.…

Ocena
5 / 5
Polubienia
12
Pobrania
58
Wydruki
2
Wyświetlenia
503
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Dry storage with desiccant containers for up to 5 standard 1kg spools of filament. Fusion 360 and STEP files included. This a remix of my original 12 gallon storage solution optimized for the 5 gallon container.

These inserts fit in the bottom of a 5 gallon Husky bin from HomeDepot ($19.98 at time of purchase).

Silica Gel Desiccant Beads can be placed in the provided containers and replaced or recycled as needed.

These 5 gallon Husky bins are relatively air-tight with a lid gasket and latches on all four sides. I live in a very dry area of the country and cannot say how well these would work in wetter climates, but I'm in and out of these boxes almost daily and have had no moisture issues.

The two end pieces are designed to fit together to provide a single spool cradle.

Thy hygrometer mount can be found here: https://makerworld.com/en/models/1125540-hygrometer-display-for-husky-5-gallon-storage-box

The Fusion 360 file has User Parameters that will allow easy modification of the inserts for other size boxes. There is also a parameter for "DovetailOffset" which is originally set to -0.15mm. Modify that parameter if you find the parts are hard to assemble.

Post-Printing

The riser that sits underneath the center section can be glued to the center section if desired. There are also provisions for 4 M30x20 or 25mm bolts for attaching the two parts. The holes in the center section have printed threads, but due to the small size, I recommend chasing the threads with a M3 tap for easier assembly.

No other post printing action is required other than removing supports (if used) and assembling the parts. Printers vary so I suggest doing some small test prints to determine if the dovetails fit securely before printing the complete parts. Use the F360 "DovetailOffset" user parameter to achieve a perfect fit.

Category: 3D Printer Accessories

Tagi