Dewalt 12v Battery Caddy / Carrier / Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small carrier for up to four 12 volt (10.8 volt) Dewalt batteries
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This a small carrier for up to four Dewalt 12 volt (called 10.8 volt in some countries) batteries. I used two of the wall mounts by peto.r_ and added a handle based on the Milwaukee carrier by Martin_au.
Printed in Overture PETG Yellow (close to Dewalt Yellow) with a color change to black near the top.
The 3mf file has painted supports, the color change, and a modifier to make the handle slightly stronger. Not totally needed, but might help print it easier. Or just use the STL with your own settings.
Tested with OEM and other 12v batteries. NOTE: this does not work with bigger 20v (18v) batteries - it is only for the smaller 12v batteries.
Thanks to peto.r_ and Martin_au for the original models I borrowed the parts from.
If you follow the lineage of the dewalt model - it goes back through several creators to 2016 for a Bosch battery. Wild ride.