Squash Ball Feet for Mercury One.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Swappable squash ball feet without reprinting the corners for a Mercury One.1
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Squash ball feet for Mercury One.1 that can be swapped onto an already built Mercury One.1 without having to print new electronics enclosure skirt corners.
I made these in an attempt to stabilise my printer which is on an uneven surface, rather than shimming the feet with folded paper. Bit of an old school resonance absorption technique.
Did it work? Yes. It sits stable.
Is it better? Resonance test say no lol.
But I’ve made them so figured I’d upload them - maybe somebody else has a niche use case.
Print Settings
Print out of PETG or above using standard Mercury One.1 print settings. No supports required.
Files & BOM
4 * M5 x 12+ SHBS
4 * 40mm Squash Ball