1 / 3
soldering jig for FCOB LED strip (10 mm 3 pin asymmetric pin layout) — zdjęcie 1
1 / 3

soldering jig for FCOB LED strip (10 mm 3 pin asymmetric pin layout)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

helps to holdcables in place for soldering to FCOB LED strip with asymmetric pin layout (e.g. ws2814) 10 mm width 3 Pins

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

couldnt find a jig for this layout so I created one.

widths: 3.1 mm for double cable 1.4 mm for single cable.
firm fit for the connectors I had but ymmv.


used them with WS2814. kept LED strip and cables firmly in place.

jig is mirrored so it can be used on both ends of the led strip.

Tagi