X-Carve 4" Dust Collection Hose Stand-off
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed to work with the X-Carve Makita Router Dust Shoe 4" Dust Collection System
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This stand-off was designed to work in tandem with the X-Carve Makita Router Dust Shoe 4" Dust Collection System I designed. It mounts to the Z-axis motor (must remove motor to slide on then reinstall) and has two threaded holes for use with M5 bolts to snug the fit on the motor body to secure it. It keeps the hose in line with the shoe and helps keep hose weight off the shoe. It works well in my shop
I printed this in PETG with 40% infill for added strength.
You'll need 4 M5 bolts, 2 for to snug to the motor, and 2 bolts for the strap that holds the hose in place, as well as a washer and nut for each of the strap bolts.
I hope this helps another X-Carve owner
The X-Carve Makita Router Dust Shoe 4" Dust Collection System file can be found here: