X-Carve 4" Dust Collection Hose Stand-off
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.33 – €7.73 net (excluding VAT)
For file: 4 INCH COLLECTION HOSE STAND OFF_0.4n_0.1mm_PETG_XLIS_6h46m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.03 excluding VAT (range midpoint).
- Weight reported by the author
- 100 g
- Print time reported by the author
- 6.77 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This was designed to work with the X-Carve Makita Router Dust Shoe 4" Dust Collection System
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This stand-off was designed to work in tandem with the X-Carve Makita Router Dust Shoe 4" Dust Collection System I designed. It mounts to the Z-axis motor (must remove motor to slide on then reinstall) and has two threaded holes for use with M5 bolts to snug the fit on the motor body to secure it. It keeps the hose in line with the shoe and helps keep hose weight off the shoe. It works well in my shop
I printed this in PETG with 40% infill for added strength.
You'll need 4 M5 bolts, 2 for to snug to the motor, and 2 bolts for the strap that holds the hose in place, as well as a washer and nut for each of the strap bolts.
I hope this helps another X-Carve owner
The X-Carve Makita Router Dust Shoe 4" Dust Collection System file can be found here: