1 / 3
Synology DS923+ Anti-Slip Retainer Clips for DeskPi Rackmate T1 — zdjęcie 1
1 / 3

Synology DS923+ Anti-Slip Retainer Clips for DeskPi Rackmate T1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-printed anti-slip retainer clips designed to prevent a Synology DS923+ from sliding inside a DeskPi Rackmate T1

Ocena
0 / 5
Polubienia
5
Pobrania
17
Wydruki
0
Wyświetlenia
335
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

These are 3D-printed anti-slip retainer clips designed to prevent a Synology DS923+ from sliding inside a DeskPi Rackmate T1 mini rack.

The clips act as mechanical stops at the front and rear of the NAS, keeping it securely positioned without modifying the rack or the device.

The design is non-invasive, fully reversible, and optimized for tight clearances in small server racks.

Features

  • Prevents front/back and lateral movement of the NAS

  • No drilling or permanent modification

  • Designed specifically for DS923+ + Rackmate T1 tolerances

  • Separate front and rear retainers

  • Simple, rigid geometry for reliable printing

Printing notes

  • Material: PLA+ or PETG recommended

  • Infill: 20–30%

  • Orientation: flat on the largest face

  • No supports required

Disclaimer

These clips are intended as anti-slip retainers, not load-bearing brackets.

Tagi