1 / 4
Hadley (metric) sleeves — zdjęcie 1
1 / 4

Hadley (metric) sleeves

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Alternate sleeve designs for the Hadley (metric).

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Introduction

These UTA and MTA sleeves are alternatives to the stock design, are easy to glue, and block more stray light. The LTA sleeve is the same as original, and only provided for completeness. 

To fit them onto your Hadley (metric), you may only need to glue the flat part onto the respective parts. Not really need to glue the inside cylindrical portion. 

The base of the MTA and UTA sleeve should point down, towards the primary mirror. There's really only one way it can fit.

Print instructions

  • PETG/PLA/ASA

  • 0.2 layer height

  • Vase mode/Single wall

  • 0.8mm line width (recommended)

  • Base should be 3 layers

Tagi