1 / 4
Hadley (metric) sleeves — image 1
1 / 4

Hadley (metric) sleeves

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Alternate sleeve designs for the Hadley (metric).

Rating
0 / 5
Likes
1
Downloads
18
Makes
0
Views
145
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Introduction

These UTA and MTA sleeves are alternatives to the stock design, are easy to glue, and block more stray light. The LTA sleeve is the same as original, and only provided for completeness. 

To fit them onto your Hadley (metric), you may only need to glue the flat part onto the respective parts. Not really need to glue the inside cylindrical portion. 

The base of the MTA and UTA sleeve should point down, towards the primary mirror. There's really only one way it can fit.

Print instructions

  • PETG/PLA/ASA

  • 0.2 layer height

  • Vase mode/Single wall

  • 0.8mm line width (recommended)

  • Base should be 3 layers

Tags