GoXLR mini Skadis holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An angled bracket to mount your GoXLR mini to a Skadis pegboard ( With HEXAGONS, because they are the BESTAGONS )
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
GoXLR mini Skadis holder
My bro' Triumph0 wanted his GoXLR to be more accessible, so this was the perfect opportunity for him to start 3D modeling with Fusion. This is basically his design, with a few tweaks on my end for printablility and reduce post-processing.
Basic design idea
He wanted the sliders to be more upright, to keep all I/O accessible, and I wanted the design to be easy to print with minimal supports and material use, so he settled on a bracket on a 45° incline, with lots of hexagonal holes to reduce the amount of material. The hooks are centered on the bracket, so there is no left/right variant.
The bracket is quite big, but it fits a Prusa MK3 bed, so most people should be able to print it.
Print parameters
To get the best results, print the bracket flat on it's side, with 15% infill, and tree supports. We printed ours in PLA. You might need a brim as well to prevent warping.
if you end up printing it, don't forget to share your make !