Wall Mount Shelly TopAC EVE01-11R Portable EV Charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Shelly TopAC Portable EV Charger. It can also be printed on a small print bed (170x200mm).
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 905
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Wall mount for Shelly TopAC Portable EV Charger. It can also be printed on a small print bed (170x200mm). The width is chosen so that the feet of the EV act as a guide.
The charger is attached using 20 mm hook-and-loop Fastener. This is recessed into the back of the mount. I deliberately decided not to use retaining tabs (due to the risk of layer adhesion/tearing).
The mount was originally intended for countersunk screws, but after printing I decided to use pan head screws instead.
The model was inspired by https://www.printables.com/model/1425391-wall-mount-topac-eve01-11 and combined with https://www.printables.com/model/119498-type-2-charging-plug-wall-holder.
Mine is printed from ASA. Currently holds up well at -9°C.
Nozzle 0.4
Layer 0.1
Wall 5
20% infill