1 / 6
Wall Mount Shelly TopAC EVE01-11R Portable EV Charger — image 1
1 / 6

Wall Mount Shelly TopAC EVE01-11R Portable EV Charger

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wall mount for Shelly TopAC Portable EV Charger. It can also be printed on a small print bed (170x200mm).

Rating
5 / 5
Likes
4
Downloads
96
Makes
1
Views
929
Reviews
1

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

Wall mount for Shelly TopAC Portable EV Charger. It can also be printed on a small print bed (170x200mm). The width is chosen so that the feet of the EV act as a guide.

The charger is attached using 20 mm hook-and-loop Fastener. This is recessed into the back of the mount. I deliberately decided not to use retaining tabs (due to the risk of layer adhesion/tearing).

The mount was originally intended for countersunk screws, but after printing I decided to use pan head screws instead.

The model was inspired by https://www.printables.com/model/1425391-wall-mount-topac-eve01-11 and combined with https://www.printables.com/model/119498-type-2-charging-plug-wall-holder.

Mine is printed from ASA. Currently holds up well at -9°C.

Nozzle 0.4

Layer 0.1

Wall 5

20% infill

Tags