1 / 6
IKEA Skadis Holder for Sondiko Butane Torch — zdjęcie 1
1 / 6

IKEA Skadis Holder for Sondiko Butane Torch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Secure mount for Sondiko Butane Torch on IKEA Skadis. Remix with integrated hooks for a perfect fit.

Ocena
5 / 5
Polubienia
8
Pobrania
44
Wydruki
2
Wyświetlenia
155
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

This is a dedicated holder for the Sondiko Butane Torch, remixed specifically for the IKEA Skadis pegboard system. It keeps your torch upright, accessible, and securely mounted to your workspace.

Remix Information This is a remix of the excellent Sondiko Butane Torch Holder by stuntjake912.

I really liked the geometry and fit of the original design, but I needed it to work with my Skadis wall control system. I have modified the back of the model to include integrated Skadis connectors, removing the need for screws or separate adapters.

Features

Perfect Fit: Designed specifically for the dimensions of the Sondiko Butane Torch.

Skadis Native: Integrated hooks slide directly into the IKEA Skadis board.

Stable Storage: Keeps the torch vertical to prevent tipping or accidental engagement.

Print Settings

Material: PLA, PLA+, or PETG (PETG recommended if your shop gets hot, but PLA is sufficient for storage).

Nozzle: 0.4mm

Layer Height: 0.20mm (Quality) or 0.24mm (Draft)

Infill: 15% - 20% Gyroid or Grid.

Supports: Required. You will likely need supports for the Skadis hooks on the back. Setting supports to "Touching Buildplate Only" usually yields the best results.

Orientation: Print in the upright orientation (as it would sit on the wall).

Installation Simply remove supports and slide the hooks into your Skadis board. The fit should be snug to prevent wobble.

Happy Printing!

Tagi