Shower style faucet attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fancy shower for your garden wash-basins
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is simple screw-on head for standard G3/4'' screw.
print with PETG without supports
Bottom part could have a bit trouble with “elephant foot” and clearance of the holes. So it was easier to clean the holes with pin / needle after printing. Current size of holes gives very soft soft thing shower streams - but its absolutly perfect for washing dirty hands and small garden objects :-)
I had a bit issue with fitting threads on bottom parts - partialy due to PETG and accuracy on the printer. But it can be screw on tightly without any water leakage.
For to part i recomend using some teflon tape to seal the threading.
Be aware that the whole “bell” of the shower head will fill up with water and the preasure will be same as in your pipes.
Future
i am planing to address few issues - mainly length and clearance of bottom screw. Also create few more patterns of holes. But i am using this attachement happily for more than year now … and this is still in “planing” phase :-)