Anycubic Chiron printed Y-Axis Linear Rail Mod Carriage Printbed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lighter than the original and hey, it's printed ;)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
One of the goal for me was a lighter Printbed. So, here is the right thing. This use 500mm MGN12H with two sliders on each rail. If 600mm rail is used, the carriages can mount more on the outside. I tried to match the genuine height.
Print at 0,3mm with 4 walls and 25% Infill with 2 lines. 5 Layers top/bottom. I used trihexagon, it feels stiff enough. I prefer HT PLA but try PETG.
Need 8x M3x6 hex screws. The rails are mounted on the outer V-Slot from the 4020 profile.
May a good mod for ChironWire if you don't want to drill like me ;)
The middle frame is located here: https://www.printables.com/model/1518962-anycubic-chiron-lighter-base-and-v-slot-carriage-f